- Encaixa:
- KAWASAKI Ninja H2 17-21
- KAWASAKI Ninja H2R 17-21
The finish is as good as I expected.
The H2 model is popular in Korea.
There's a lot of interest in undercolls. I'm also using a-tech products
I have placed an order.
The overall packaging of the cowl...consulte Mais informação - I don't have z900rs se version of painting product
I ordered a white gel type and waited for about two months I got it.
It's hard to find a color that matches the decal line
Stripe line also worked wi...consulte Mais informação - If you order this
Check your hooks diameter first,
Looks strong and
When lift up, it's solid without shaking.
Don't forget to check the internal diameter size of the swing arm's hook and then jive ...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 DAEG
- KAWASAKI GPZ900R -A6
- KAWASAKI GPZ900R A7-
- KAWASAKI Z900RS
- KAWASAKI Z900RS CAFE
The surface is very clean, and the installation is very easy.
Fasten the enclosed bolt to the swing arm.
The surface is smooth and beautifully finished
It looks strong enough.
The lift requires a spoo...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS
- KAWASAKI Z900RS CAFE
I tuned z900rs by almostly k-factory parts
This product have a high quality and defense dust thing for swing arm hole
Good print logo and nice finish
I hope to buy silver color tooconsulte Mais informação - Encaixa:
- KAWASAKI Z900RS
- KAWASAKI Z900RS CAFE
I dressed up almost parts by k-factory
Quality is always high
And parts look is clean
You can setup easily and have a nice look
consulte Mais informação - Encaixa:
- KAWASAKI Z900RS 18-23
Installing is very easy and you can find an installation video on youtube
break lever pushing feeling is more tightly good
I chose yellow spring, and the color goes well with Ohlinsconsulte Mais informação - After replacing it with a master cylinder from brembo, it was a racing type, so I was in trouble because there was no mirror holder.
People around me recommended the antilion product, so I ordered it ...consulte Mais informação - Encaixa:
- HONDA CB1300 SUPER BOLDOR 06-07
- HONDA CB1300 SUPER BOLDOR 08-13
- HONDA X-4
- HONDA CB1300SF 03-04
- HONDA CB1300SF 05-07
- ...e mais.
The left and right sliders are very light and neatly injected.
It's simple to install it by putting it in the left and right holes of the front axle.
I have z900rs, but I changed the front suspension ...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS 18-23
- KAWASAKI Z900RS CAFE 18-23
Installing the product is simple.
Install the lift jack under the engine
After releasing the bolt, install the subframe.
The spacer was about 1mm larger.
If you buff it after installing all the produc...consulte Mais informação - Encaixa:
- HONDA CROSS CUB110 13-21
- HONDA CROSS CUB50 18-20
- HONDA SUPER CUB110 18-20
- HONDA SUPER CUB50 18-20
It doesn't fit the 2023 model.
When I attached it to the shock absorber tightening area,
It looks like it's available.
I hope it comes out as a suitable product for 2023 or as a 3roads.consulte Mais informação - Encaixa:
- HONDA SUPER CUB110 2BJ-JA44
- HONDA SUPER CUB 50 2BH-AA09
The components are simpler than you think.
It's not hard to assemble.
Use a bolt on an L-shaped lever to align the center of the windscreen for easy use.
I'm satisfied with the design.
It covers a l...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS 18-21 ZR900C(50mm short)
I bought and replaced the fat condor handle bar from the hurricane company. It is compatible with genuine clutch cables, but the cable on the clutch case side is stretched out, so it is perfect to pu...consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI
This product is made of steel and has rigidity
Color expression of neat anodizing
The edge has a very high finish.
It is compatible with archi's long tail.
Because of the fenderless, the angular beaut...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS cafe
- KAWASAKI Z900RS
The product quality and finish of the cap cover are good. The anodizing color is also good.
Remove the existing rubber cover and remove the pin
Insert the Aella nut cover and insert a new pin into the...consulte Mais informação - The inside is made of French Terry. I thought it wouldn't be warm because it's not a peach hat product, but the fabric is thick and it keeps you warm.
The Kawasaki emblem on the chest also has a patch...consulte Mais informação - Encaixa:
- HONDA CB400SF 14-21 NC42 [Frame No.]NC42-1600001 or later
- HONDA CB400SUPER BOLDOR 14 NC42 [Frame No.]NC42-1600001 or later
The material and expression of the slider are very luxurious.
The installation was as simple as any other slider, and I think my cb400sf will provide excellent engine protection. Sliders, included was...consulte Mais informação - The quality is good and the texture is soft and comfortable.
I think if you wear it inside an outer jacket in spring and fall,
I think it will be very reliable.
Also, it is very breathable, so I think...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS 18-24
- KAWASAKI Z900RS CAFE 18-24
I prefer the product of archi.
Subframes, back steps, long tails, fender kits, etc
Backstep isn't hard enough to change by yourself
However, since the vibration is close, you have to do a strong bolt...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS 18-21 ZR900C
In my case, I had pain in the back of my neck and shoulder when I used the pure handle for more than an hour.
However, it became very convenient after changing to the product.
The installation is rela...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING