아무래도 헌터커브는 순정 리어렉에 그냥 앉기에는 너무 단단하여 동승자의 안락을 위해 구매하였는데요, 장착법은 어떠한 공구 없이도 간단히 장착이 되어서 좋습니다. 동승자도 넓고 푹시해서 불편하지는 않다고 평가합니다. 다른 적재물을 위해서 탈착을 할때도 역시나 편하여 추천합니다.
View Detail
- Instock
51.99 EUR (8,968 JPY)
Webike Point: +90 pt
(0.52 EUR)
informação de entrega
In Stock : 5 left, Ships within 24 hours.
Estimated arrival date around
Montagem
HONDA
Open Fit Model Information Table
-
CT125
(JA55-1000001 and later)
-
CROSSCUB110
(JA45-1000001 or later/JA60-1000001 or later)
-
SUPER CUB110
(JA07-1000001 or later/JA10-1000001 or later/JA44-1000001 or later/JA59-1000001 or later)
-
SUPER CUB 90DELUXE
(HA02)*The Super Cub 90 cannot be installed on the Custom/Super Custom because the shape of the carrier is different.
ver todos
HONDA
Descrição do produto abaixo é traduzir automaticamente pelo Google.
Detalhes do produto
[Cor]Preto
[Tamanho]300mm x 300mm x 55mm
*- Mesmo que seja o Super Cub70 / 90, não pode ser instalado no Custom / Super Personalizado porque a forma do portador é diferente.
Pode haver alterações nas especificações do produto devido a razões do fabricante.
- Este produto é apenas para modelos com os números do modelo e da moldura listados. Não pode ser instalado em qualquer outro modelo..
[Componentes]
Assento Pillion x 1
*Se não houver ligação às peças de reparação, por favor cite-nos atravésCotação de itens não listados
[Documentos]
Manual :japonês
[Catálogo Online]
Catálogo Online de SP Takegawa's (Japonês).
[Descrição do Produto]
Assento de pilhão do tipo largo para conforto e segurança dos passageiros
Quando instalado no transportador traseiro, aumenta o conforto e a segurança dos passageiros. O banco está também equipado com um cinto de segurança para fixar a postura do passageiro.
A esponja especial é utilizada no interior do assento para resistência à vibração e amortecimento. Isto reduz a fadiga enquanto se monta e permite desfrutar de um passeio confortável.
Fácil de instalar e remover do suporte traseiro sem necessidade de ferramentas!
A base de assento do banco Pillion da SP Takegawa foi concebida para caber no suporte traseiro e tem um gancho de fixação especial. A base do assento do assento Pillion Seat da SP Takegawa foi concebida para caber no suporte traseiro e tem ganchos especiais para fixar o assento no lugar. Isto facilita a fixação e desmontagem do assento piloto sem a necessidade de ferramentas. Além disso, o ajuste da forma da inserção e a tensão dos ganchos de fixação asseguram que o assento é fixado com segurança ao suporte traseiro.
O desenho do estofo do assento é baseado num motivo de superfície lichia. Logotipo SP Takegawa na parte de trás.
Cuidado
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Avaliações de Clientes
Reviews with image
Fits:HONDA CT125 (JA55-1000001 and later), HONDA CROSSCUB110 (JA45-1000001 or later/JA60-1000001 or later), HONDA SUPER CUB110 (JA07-1000001 or later/JA10-1000001 or later/JA44-1000001 or later/JA59-1000001 or later), HONDA SUPER CUB 90DELUXE (HA02)*The Super Cub 90 cannot be installed on the Custom/Super Custom because the shape of the carrier is different., HONDA SUPER CUB70DELUXE (C70)*The Super Cub 70 cannot be installed on the Custom/Super Custom because the shape of the carrier is different.
Fits:HONDA CT125 (JA55-1000001 and later), HONDA CROSSCUB110 (JA45-1000001 or later/JA60-1000001 or later), HONDA SUPER CUB110 (JA07-1000001 or later/JA10-1000001 or later/JA44-1000001 or later/JA59-1000001 or later), HONDA SUPER CUB 90DELUXE (HA02)*The Super Cub 90 cannot be installed on the Custom/Super Custom because the shape of the carrier is different., HONDA SUPER CUB70DELUXE (C70)*The Super Cub 70 cannot be installed on the Custom/Super Custom because the shape of the carrier is different.
Installed on: HONDA CT125 Hunter Cub
Jul 30, 2022
Great fit great price and got to the US within 2 weeks. No mounting bracket or anything needed simple turn a knob like hook and it grabs perfect to my trail 125s rack. Leather quality is outstanding and I'm very pleased overall. This is the one to Getz
View DetailHelpful?
Fits:HONDA CT125 (JA55-1000001 and later), HONDA CROSSCUB110 (JA45-1000001 or later/JA60-1000001 or later), HONDA SUPER CUB110 (JA07-1000001 or later/JA10-1000001 or later/JA44-1000001 or later/JA59-1000001 or later), HONDA SUPER CUB 90DELUXE (HA02)*The Super Cub 90 cannot be installed on the Custom/Super Custom because the shape of the carrier is different., HONDA SUPER CUB70DELUXE (C70)*The Super Cub 70 cannot be installed on the Custom/Super Custom because the shape of the carrier is different.
Jul 28, 2022
Bought it to Tandem with my wife and go out.
At the time of pre-purchase Wooil MiddleCarrier CT110 for HUNTER CUBCT125 I purchased this product after researching the conditions that it would not interfere with my existing car, and that it would be comfortable to ride on.
It is easy to detach because it is just a snap-on type (and by implication, easy to be stolen). (By implication, it is also easy to be stolen.) Therefore, I remove it except when I tandem with my wife.
According to my wife, the ride quality is better than that of Seat because of the fuchsia. The Carrier also did not interfere at all, so there was no problem in that respect. （The price is not so high compared to other tandem seats, so I recommend this seat.
Helpful?
Fits:HONDA CT125 (JA55-1000001 and later), HONDA CROSSCUB110 (JA45-1000001 or later/JA60-1000001 or later), HONDA SUPER CUB110 (JA07-1000001 or later/JA10-1000001 or later/JA44-1000001 or later/JA59-1000001 or later), HONDA SUPER CUB 90DELUXE (HA02)*The Super Cub 90 cannot be installed on the Custom/Super Custom because the shape of the carrier is different., HONDA SUPER CUB70DELUXE (C70)*The Super Cub 70 cannot be installed on the Custom/Super Custom because the shape of the carrier is different.
Installed on: HONDA CT125 Hunter Cub
Jun 30, 2022
I'm more than pleased with this seat.It fits my ct125 like a glove. I was unsure about purchasing the seat since there was very little information and reviews concerning fit and how it secured to the bike itself. Outside of the manufacturer description which did not include photos of the hook mechanism which in theory attaches it to the carrier and allows detachment without tools.I went ahead and made the purchase hoping Japanese engineering and attention to detail would result in a good product and I was not wrong.The seat has a fixed curved hinge which anchors the front of the seat to the motorcycle. It also has a mid rectangular Tab which fits snuggly and maintains the seat from sliding at all. It couples with the hole in the center of the ct125 rear carrier. Finally it has two hooks which are designed to be pulled by your fingers and latch onto two additional orifices within the carrier frame to hold the rear of the seat in place.The hooks were a little finicky but only because it was my first time Installing it and I was learning how it fit.The seat is fantastic. My wife and kids have ridden on it and the material used offers a plush ride. I heard no complaints about comfort and I have zero qualms about it becoming detached. It being able to be removed without tools and yet fitting so snuggly and appropriately set this apart. I'm glad I bought it.
View Detail
Helpful?
Fits:HONDA CT125 (JA55-1000001 and later), HONDA CROSSCUB110 (JA45-1000001 or later/JA60-1000001 or later), HONDA SUPER CUB110 (JA07-1000001 or later/JA10-1000001 or later/JA44-1000001 or later/JA59-1000001 or later), HONDA SUPER CUB 90DELUXE (HA02)*The Super Cub 90 cannot be installed on the Custom/Super Custom because the shape of the carrier is different., HONDA SUPER CUB70DELUXE (C70)*The Super Cub 70 cannot be installed on the Custom/Super Custom because the shape of the carrier is different.
Apr 22, 2021
It's almost as big as Carrier! It feels OEM!
I don't have anyone to give rides to, but...
It is fixed by putting the Hook of the Genus Gold on the CarrierReverse side for installation, but it is quite hard, and when the Hook is pulled with a tool, the Carrier and the Hook are slightly scratched. I think that it is not a problem if you do not remove it because it is a part not seen. If you are worried about it, you might want to Touch pan after you install it!
Personally, I find it easier to work with Bolt stops instead of Hook stops.
Helpful?
New Custom Articles
