All my motorcycles are equipped with this power supply unit. The 20amp supply, i used it on the additional horn, one for usb charger and one for spotlights and still there's one more spare outlet. Overall, everything is in order and well worth.
View Detail
- Instock
14.07 EUR (2,430 JPY) 17.37 EUR Salve 19%
Webike Point: +24 pt
(0.13 EUR)
informação de entrega
In Stock, Ships within 24 hours.
Estimated arrival date around
Descrição do produto abaixo é traduzir automaticamente pelo Google.
Detalhes do produto
Alto rendimento 17,5A (total de 3 sistemas ACC)
Composição do produto : Corpo da unidade X1, Fusível de lâmina de perfil baixo (7.5A) X1, Fusível de lâmina de perfil baixo (5A) X2, Fusível de lâmina de perfil baixo (20A) X1, Fita de dupla face X1, Conector de fio X1, Faixa de ligação X2
**ACC 17,5A para 3 sistemas no total.
*As configurações da amperagem estão limitadas a um total de 20 amps.
*Por favor, faça o processamento da cablagem separadamente para a ligação a cada equipamento eléctrico.
*Há um caso em que há uma mudança de especificação da mercadoria pela conveniência do fabricante. Por favor, compreendam..
Gestão de lotes de fornecimento de energia acessório e fornecimento de energia constante.
Unidade de alimentação inteligente com três sistemas de alimentação acessórios (ACC) e um sistema de alimentação constante.
3 linhas de ACC podem ser definidas para a amperagem.
Extrair facilmente múltiplas fontes de alimentação de 12V.
A fonte de alimentação acessória pode ser ligada e desligada em conjunto com a chave principal, e a amperagem pode ser alterada através da substituição do fusível incorporado..
Cuidado
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Avaliações de Clientes
Reviews with image
Installed on: YAMAHA MT-09 (FZ-09)
Installed on: HONDA CBR250RR (2016-)
Nov 16, 2023
Proper & Safe power distribution
This D-unit was very easy to install, tap directly from battery. This is the best and safest way to distribute power to additional accessories your bike may have. Each outlet is fused, so there's an added layer of safety. Each of the connector from outlet also has waterproof cover. Minor drawback is the terminal connecting from the battery is open, so depending on where you install it, you might risk having water passing thru (rain water, during bike wash). On my bike, i had to cover it with plastic so no short can happen.
View DetailHelpful?
Jul 25, 2022
I bought it to clean up the Battery area and it works.
We had a hard time finding the mounting position because it eats up some space, but we ended up fixing it with Velcro on the back of the Cowl.
There is another similar product available from DAYTONA, but we decided on this one considering the Wiring exit direction and the actual mounting location.
ACC power was checked for continuity with Tester and taken under
Mini Flat Type Fuse Power
https://www.webike.net/sd/1353357/
Connected devices are
Constant power supply:MistubaDriveRecorder, DAYTONAUSB×2 power supply (around Handlebar + under Seat)
5A ETC, ? Reserve
... 7.5A:? Squid Ring fog×2
The DriveRecorder requires the ACC power supply to be connected to the third terminal, so it is connected to the ? Connect to the + terminal.
The fogs that use the most electricity are 40W×2 but the 7.5A terminals helped.
Points to keep in mind
The Smallest Bullet Terminal is used.
Need to be installed in a place where it will not be exposed to water.
The lid comes off and needs to be secured (holes for harness band can be used).
Two Nut terminals are used for the constant power supply, but it might be better to use a thin Spanner to avoid damaging the base when tightening the terminals.
Helpful?
May 3, 2022
DriveRecorder - purchased for installation
The product concept is good, but there are many complaints during installation. Quality is also not good in CHINA.
Inadequacy
1・Bullet Type Terminal is Chinese standard, so JIS standard Bullet Type Terminal does not fit.
All need to be replaced.
2・If you pull out the fuse, the fuse will break. If the fuse is not cut, it is better not to pull it out.
3・Cable for constant power supply is abnormally hard. The Y terminal is also difficult to use.
The only satisfactory point is that it is easier to get additional power.
Helpful?
Installed on: KAWASAKI Z900RS
Apr 15, 2022
Before I bought this, the additional accessories wiring on my bike are very messy. I immediately purchase it the moment I saw this. Now everything looks neat and tidy and easy to identify which is which. Item install on kawasaki z125 pro
View DetailHelpful?
New Custom Articles
