About quality and texture, I can confirm that the quality is great and that the material used is steel with a black finish. About the feeling of use, A better looking and more flexiable with drive sprocket changes then the original Honda part. Easily allowing for the installation of a 16 tooth drive sprocket which was my main goal.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a rear driven sprocket and drive chain to your cart after fitting a larger drive sprocket with this chain guide plate.Difficulty of installation, I can say the fitment of the chain guide plate for my installation was easy due to the ease of access with the removal of the forward sprocket cover and simple nature of placing the chain guide plate back behind the sprocket cover before tightening down.Cost performance and comparison with other products, The pricing of the product is great. You receive a wide chain guide plate made from quality with a design superior to the original Honda part. There are no cheaper options with the wide design but SP Takegawa do also sell a version that is worth looking onto.About shipping and packaging, This order was shipped a little later then usual due to a Easter break and I did have some issue accessing the tracking details also but the FEDEX order did arrive within the estimated date range.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.
View Detail
- Instock
8.29 EUR (1,430 JPY)
informação de entrega
In Stock : 4 left, Ships within 24 hours.
Estimated arrival date around
Montagem
-
glom
JC61 (all models)
-
glom
JC75 (all models)
-
CT125CT110 HUNTER CUB
JA55 (all models)
-
SUPER CUBC125
JA48 (all models)
ver todos
HONDA
Detalhes do produto
Material]Aço
Cor]Acabamento preto
Podem ser instalados até 17T.
**Se substituir a roda dentada por outra que não a normal (drive/15T, drive/34T), haverá um erro no mostrador do velocímetro, pelo que se recomenda a sua utilização em corridas.
*É necessária uma unidade separada de conversão de impulsos de velocidade para a condução em estradas públicas.
*Não disponível para Macaco 125 (modelo ABS).
*Há um caso em que há uma mudança de especificação da mercadoria pela conveniência do fabricante. Por favor, compreendam..
As rodas dentadas de 16T/17T podem agora ser usadas!
Ao substituir a placa guia de corrente normal instalada na cobertura da roda dentada, é possível instalar uma roda dentada maior do que uma roda dentada normal..
(Permite a substituição de equipamento quando necessário para corridas, afinações, etc.). )
Cuidado
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Avaliações de Clientes
Reviews with image
Fits:HONDA CT125CT110 HUNTER CUB JA55 (all models), HONDA glom JC61 (all models), HONDA glom JC75 (all models), HONDA SUPER CUBC125 JA48 (all models), HONDA MONKEY125 JB02(all models)
Installed on: HONDA MSX125 (GROM)
Fits:HONDA CT125CT110 HUNTER CUB JA55 (all models), HONDA glom JC61 (all models), HONDA glom JC75 (all models), HONDA SUPER CUBC125 JA48 (all models), HONDA MONKEY125 JB02(all models)
Sep 23, 2021
I replaced the Sprocket Cover with this product because it looks like a gold chain slider and I wanted to expand the range to adjust the GEAR ratio in the future.
As for installation, it is almost the same as NORMAL, so if you use Normal cover, it might be tricky.
The texture is trustworthy KITACO, no problem at all.
In addition, this is because the speedometer goes wrong when the GEAR ratio changes and the speedometer sensor made by the same KITACO becomes detection by the front wheel, and this cannot be installed when this is ABS.
Therefore, if you want to change the GEAR ratio, you will need a separate sensor that can be installed on ABS such as Takekawa.
If you don't want to change the GEAR ratio, you can use ABS without any problem, so it's worth considering if you are using a Sprocket Cover that you can see inside.
Fits:HONDA CT125CT110 HUNTER CUB JA55 (all models), HONDA glom JC61 (all models), HONDA glom JC75 (all models), HONDA SUPER CUBC125 JA48 (all models), HONDA MONKEY125 JB02(all models)
Jan 2, 2021
대기어에 소기어의 기어비 변경하면서 소기어가 커져서 체인과 간섭이 생겨서 구매했습니다배송은 느리지 않고 빨랐습니다 하지만 아직 장착은 하지 않았습니다직접 장착을 하려고 했는데 날씨가 추워서 아직 장착을 못하고 있습니다날씨가 조금 따듯해 지면 장착을 해야겠습니다I bought the large gear because the small gear became larger and interfered with the chain while changing the gear ratio of the small gear.Delivery was not slow but fast, but we haven't installed it yet.I tried to install it myself, but the weather is cold so I can’t installWhen the weather gets a little warmer, I need to install it.translated by Google Translator
View Detail
New Custom Articles
