Kit Fenderless

For the Tire replacement!

Fits:KAWASAKI ZX-6R 09-18

Japanese Webike user

Very Good

Nov 12, 2021

ZX-6R (2016) I've installed it on!
The reason for this is because I started competing in Race classes with numbers and the frequency of tire changes went up and I got tired of the OEM Fender getting in the way every time lol.

The replacement process was almost effortless, and even I, who had never even removed a RearCowl before, was able to finish the job in about 2 hours!

There are many Reviews on the look and feel of this site, so the required tools and OEMFender removal instructions that are not in the Instruction Manual. (Not surprisingly, it's not listed anywhere) I'm going to write briefly about what I wanted to know before I bought it, OthersSmall stuff, etc.

Minimum tools required
On-board tools
(5mm and 4mmHexagonal Wrench, Phillips Screwdriver, 10mmWrench)
10mm Socket and something that can turn it
(50mm Extension&Ratchet wrench or Tren etc.)
Nipperor Powerful Scissors

Useful tools to have
・Radio pliers
・Electric Works Pliers
5mm and 4mm Hex
Arm strength

OEMFender Removal Instructions
Remove RearSeat
? Remove both Side cowl
Remove the Seat
Remove the RearPanel
Remove the LeftRearCowl.
Remove the Connector that was hidden in the LeftRearCowl.
(3 Wirings that are missing towards Fender)
Remove the 4 bolts that are fixing the Fender from under the Rear Seat.
completion

Others
Cowl is connected by a lot of nails, so please be careful not to break it.
You might want to take a look at the YouTubers!
The removal and installation of the Blinker is the most difficult part.
The way to remove it is simple enough to see, but it's hard anyway!
(It took me a little over an hour of my two hours to do this).
It is easy to remove by twisting after removing the two gold plates.
The installation is something of a spirit, good luck!
Electric Works Pliers is required to make a connector for License Plate Light.
(Because of the crimped terminals)
If you don't have one, please cut off the OEM connector part and connect it using the included Electro Tap.
Electro Tap is not very durable, so buy or borrow some Electric Works Pliers and make a Connector somehow!

that's all
I hope that helps in some way!

Helpful?

Fits:KAWASAKI ZX-6R 09-18

Japanese Vehicle Inspection Correspondence

Very Good

Mar 17, 2019

Japanese Vehicle Inspection Correspondence I was troubled with the Trickster's product, but the shape of the TYPE-3 Slim reflector I chose the Active one because it was so cool
I don't know because I had a mechanic do the installation
I don't like the angle of the Number to sleep either, so this product doesn't sleep that far and back I also like the fact that it is clearly visible from the
Overall Refreshingly cohesive and a bit pricey, but I think the price is a bit high for the 6R Japanese Vehicle Inspection When it comes to choosing the CorrespondenceFender Eliminator, the Active I'm glad it's from the company

Helpful?

Fits:KAWASAKI ZX-6R 09-18

Excellent

Jul 22, 2018

I refreshed very much!

It was very refreshing and it became even cooler!

I think installation is easy except for Blinker.

The installation of Blinker was very difficult and it took quite a while.

I did not understand well that Instruction Manual was only written quite easily.
There are people who are giving way to do it by Net so I think that you can work without problems if you refer.

Helpful?

Fits:KAWASAKI ZX-6R 09-18

Excellent

Sep 22, 2016

I like Design

Although it is sold from various Manufacturers,
Design (My preference) When
I decided Active by price.

Because quality is good, you can install it without difficulty.
It can be done in about 15 minutes.
(Removal of Blinker was troublesome)

I made my own Reflector.

It is satisfying because the Rear around is clear.
After that when the road surface is Wet What kind of silk?

Helpful?

Fits:KAWASAKI ZX-6R 09-18

A complete set and useful

Average

Jun 22, 2016

Installation etc etc. I was able to install it satisfactorily well.
However, it is still relatively expensive compared to goods, I think that I could make it cheaply, as it is, at Homsen Bracket if I thought well enough.
It is pretty because the Screws, the License Plate Light, and the Coupler are complete and the angular position and the hole position are in place even if you do not think about anything.