We use cookies to provide and improve our services. By using our site, you consent to our Privacy Policy including cookie. Learn more

[IMPORTANT] Input Control of Shipping Address Field Read more

Camshaft [ST-1].
Camshaft [ST-1].
Camshaft [ST-1].
Camshaft [ST-1].
Camshaft [ST-1].
Camshaft [ST-1].
/
  • Camshaft [ST-1].
  • Camshaft [ST-1].
  • Camshaft [ST-1].
  • Camshaft [ST-1].
  • Camshaft [ST-1].
  • Camshaft [ST-1].
YOSHIMURA

Camshaft [ST-1].

Produtos # 211-406-0101

4.5 (11 rever)
  • Instock

・Esta opção não está disponível.

・Por favor, selecione outras opções.

66.96 EUR (11,550 JPY)

Webike Point: +116 pt  (0.67 EUR)

informação de entrega

  • In Stock, Ships within 24 hours.

  • Estimated arrival date around

Quantidade
Pergunte sobre este Produto

Montagem

HONDA
Open Fit Model Information Table
Descrição do produto abaixo é traduzir automaticamente pelo Google.

Detalhes do produto

[APE100/XR100 MOTARD]
tipo : ST-1
MAX LIFT(mm) : IN 6.40mm/EX 6.50mm
1mm DURAÇÃO(grau) : IN 228,0 graus / EX 232,0 graus
Folga padrão de tapetes : IN 0.10/EX 0.10

[APE50/XR50 MOTARD]
tipo : ST-1
MAX LIFT(mm) : IN 6.35/EX 6.45
1mm DURAÇÃO(grau) : IN 224.0/EX 230.2
Folga padrão de tapetes : IN 0.10/EX 0.10

**As especificações da árvore de cames são derivadas dos valores de concepção da árvore de cames. Devido ao processo de fabrico, há um ligeiro desvio de lote para lote. O ST-1 pode normalmente ser instalado por aparafusamento, mas se for necessário um timing mais preciso, recomenda-se que se volte a definir o timing das válvulas para cada veículo.
*As molas das válvulas devem ser STD.
*Apenas cabeça STD. Não compatível com o kit de cabeça Yoshimura.
*Este produto é apenas para uso em corridas..

[APE100/XR100 MOTARD]
Type: ST-1
MAX LIFT(mm):IN 6.40mm/EX 6.50mm
1mm DURATION(degree):IN 228.0 degrees / EX 232.0 degrees
Standard tappet clearance :IN 0.10/EX 0.10

[APE50/XR50 MOTARD]
Type: ST-1
MAX LIFT(mm):IN 6.35/EX 6.45
1mm DURATION(degree):IN 224.0/EX 230.2
Standard tappet clearance :IN 0.10/EX 0.10

**The cam specs shown are calculated from the design values of the camshaft. Due to the manufacturing process, there is a slight variation in each lot.The ST-1 can be installed by bolt-on, but if you need more accurate timing, it is recommended to re-set the valve timing for each vehicle.
*Please use STD valve springs.
*Exclusively for stock heads.YOSHIMIURA head kit cannot be used.
*This product is for racing use only..

Através da utilização de um método de maquinação total, conseguimos alcançar uma elevada resistência ao desgaste e uma redução de peso de 5% em comparação com as DST, aumentando ao mesmo tempo a elevação máxima..
Como resultado da nossa medição com o kit completo Yoshimura (ST-1 cam + Yoshimura Cyclone + carburador TM-MJN24) no Ape100, o desempenho foi melhorado em mais de 180% em comparação com o STD.. A curva de potência e torque é muito melhor do que a STD de baixa a alta rpm.. (Dependendo do veículo, pode ser necessário rapar ligeiramente o suporte do came.. )

Cuidado

* If there may be an instruction manual included, it will be written in Japanese.

MODEL PAGE LINKS

HONDA

Avaliações de Clientes

4.5 /5
(11 rever)

5 stars

55%

4 stars

45%

3 stars

0%

2 stars

0%

1 star

0%

Escreva uma crítica
review banner

Reviews with image

although a kitaco twin tapered end muffler, a CRF duct, and an insulator outside carried out, it came out and it attached -- rotational frequency up -- rather than -- torque up all over the districts was felt. <br>If it combines with caliber up of a carbur
although the cam of the manufacturer who is different until now was used -- it is exchange to ST-1 -- although I am 80 cc, after I put this in, the maximum high speeds are 98 K of 10-K up. <br>There is rather no elongation in high rotation by inside rotati
Although there is work which deletes a little cam holder, as it is, the engine performance is also raised.

YOSHIMURA

Camshaft [ST-1].

Fits:HONDA APE 100 TypeD , HONDA NSF100 , HONDA XR100MOTARD , HONDA XR50 MOTARD , HONDA APE 50

Excellent

Apr 2, 2022

More power

This cam came well packaged and shipped quickly. It makes noticeable power gains over my old bbr cam, installed on a 2004 crf100f with 120 bbr kit.

View Detail
More power
Helpful?

YOSHIMURA

Camshaft [ST-1].

Fits:HONDA APE 100 TypeD , HONDA NSF100 , HONDA XR100MOTARD , HONDA XR50 MOTARD , HONDA APE 50

Excellent

Feb 19, 2020

Yoshi ST-1 cam XR100R

I added this camshaft to my modified 2000 XR100. Big gain!!! Noticible power increse!! Also it revs higher!! The cam fit perfect. Fits stock cam journal, and it fit my aftermarket journal. Engine mods as follows: FmF pipe, ATC200 Carb, 120CC piston, Shift up Head, Shift up oil shower journal,Yoshi cam. I like riding this Modified XR100 more than large cc bikes. Pure fun. It came in a box and a sticker was included. Sweet

View Detail
Yoshi ST-1 cam XR100R
Helpful?

YOSHIMURA

Camshaft [ST-1].

Fits:HONDA APE 100 TypeD , HONDA NSF100 , HONDA XR100MOTARD , HONDA XR50 MOTARD , HONDA APE 50

Excellent

Apr 24, 2016

It is YOSHIMURA!

I used XR80Cam for many years in the vertical engine, but since I wanted to use YOSHIMURACam, I bought it.
Yoshimura logo is marked on the surface Tufftride processing and the Tension rises. Although I am using about 5000 km, there is almost no wear of Tufftride.
Other Manufacturer also had something that squeezed the heat treatment sweetly, but YOSHIMURA can realize the lightness even if it is processed with the core of the core part cut out from the steel material and it is rotated.
Rather than saying that the rotation will rise without limit, from around 5000 revolutions (50 km / H) Punch came out and it's a delicious Cam in the city.

View Detail
It is YOSHIMURA!
Helpful?

YOSHIMURA

Camshaft [ST-1].

Fits:HONDA APE 100 TypeD , HONDA NSF100 , HONDA XR100MOTARD , HONDA XR50 MOTARD , HONDA APE 50

Very Good

May 18, 2015

I want to attach Cam of YOSHIMURA

Takekawa SStage 115cc Bore Up Kit comes with Camshaft replacement. First I was surprised that Torque in the low and middle speed region was able to feel it. I feel that it seems that the high revolution range does not grow a little. Waiting Spec. It is not good for you.

View Detail
I want to attach Cam of YOSHIMURA
Helpful?

YOSHIMURA

Camshaft [ST-1].

Fits:HONDA APE 100 TypeD , HONDA NSF100 , HONDA XR100MOTARD , HONDA XR50 MOTARD , HONDA APE 50

Very Good

Jan 8, 2013

ST-1 Camshaft exchange was carried out.Although full admission has not been used yet, it is thought that the Torque of an inside low speed is going up.It
-run-came to be easy.It is satisfied although processing, such as deleting a little
Cam

ST-1 Camshaft exchange was carried out.Although full admission has not been used yet, it is thought that the Torque of an inside low speed is going up.It
-run-came to be easy.It is satisfied although processing, such as deleting a little
Cam holder, may be required.

View Detail
ST-1 Camshaft exchange was carried out.Although ...
Helpful?

New Custom Articles

ver todos
KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



KAWASAKI GPZ900R Custom



Review detail

Role para cima