- ACTIVE's LEDNumber SIDEBlinker Straight I used this product to install a Kawasaki Ninja 250SL for KAWASAKI, and of course it fits just right! This product is a recommendation!consulte Mais informação
- I used it to replace the blinker on my z900rs. 2 in a pack so I ordered 2 for Front and 2 for Rear.It would have been nice if Coupler was color coded like OEM.consulte Mais informação
- I think it would be convenient because it would eliminate the need to cut or otherwise damage the OEM connectoretc. when replacing it with an external LED Blinker.consulte Mais informação
- I used the Blinker replacement on my 8BL w800. I could use it without any problem at all. If possible, I would have liked the color of the coupler to match the OEM, but considering the cost, I guess i...consulte Mais informação
- I bought this to change Blinker's Coupler.consulte Mais informação
- After the Fender Eliminator and the Rear Refreshing, I decided to replace the OEM Blinker with an external Blinker because of its presence.When replacing without cutting off the original wiring, this ...consulte Mais informação
- After the Fender Eliminator and the Rear Refreshing, I decided to replace the OEM Blinker with an external Blinker because of its presence.When replacing without cutting off the original wiring, this ...consulte Mais informação
- It is not necessary to replace the parts, neither too much nor too little.consulte Mais informação
- Nice simple product which fit perfectly on my Kawasaki Z900RS 2022.Was needed for replacing my original indicators to LED ones.consulte Mais informação
- These are well made but do not fit the Z900rs. The connections of the turn signals on the Z900rs are different. High quality but wrong connection terminals. consulte Mais informação
- The Blinker wiring we used was too thin, so we modified it and installed it here.consulte Mais informação
- Used to replace the Blinker from Other Brand Product.There is also a way to turn off BodyHarness and change it to Bullet Terminal.I didn't want to hurt OEMHarness, so I installed it!In my case, I chan...consulte Mais informação
- I bought this one because I needed to modify the OEM Wiring for my BlinkerLED conversion!Can be installed with Bullet Terminal without scratching the OEMWiring!I think it's good that it can be powered...consulte Mais informação
- Purchased as a replacement for the Blinker.Reasonably priced and the length is just right and satisfactory.consulte Mais informação
- Z1000 with LED Blinker by OEM from 18~ also needs this conversion Coupler.consulte Mais informação
- When I installed the ZX-25RFender Eliminator Kit, I also replaced the blinker with an external one, so I bought this conversion coupler.I didn't want to cut the harshness on the car body when I instal...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING