You had better quit dual use.
I can still use Rear, but Front does not feel like going up.
Forcibly raised Motorcycle collapsed.
On the contrary it was expensive shopping.
After all, I replaced a famous Manufacturer.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
You had better quit dual use.
I can still use Rear, but Front does not feel like going up.
Forcibly raised Motorcycle collapsed.
On the contrary it was expensive shopping.
After all, I replaced a famous Manufacturer.
MT-09 (The '14.) For the front up of (It's a low rating.) I bought it as a no-go
I assembled it with reference to the parts drawing and lifted it up fearlessly Can you use it properly?
I think it's basic to use the Rear Stand together
Assembly is not difficult, the parts diagram is sufficient
The adapter has a few bumps in it, but it's usable and for $6,000, I'm happy with itView Detail
as for Front or for Rear, depending on the conditions … the place
In our environment (CBR250RR and X11)
i feel LimitOut as it is both for Front and for Rear It's a pity
as for Front, it cannot be used to hit Fender due to the problem of Clearance
for Rear, X11 (with 190/50R17) would be a great sturdy CBR It's not tall enough for the 250RR (140/70R17 installed)
I bought a thick rubber sheet at the home center and put it on the L-box It is
Front stand assumes Large, with the Rear lifted and stabilized first It's something we use, so this front and back combination is a good idea "Already have a for Rear and multiple motorcycles" I don't think it makes sense unless it is
But since it is inexpensive even if you think of it as for Front, I think the evaluation will vary depending on how you view that point It isView Detail
Since I am a maintenance beginner, when I first used it, I was pretty worried because I would beat Motorcycle Body, but once I grab hang, I could easily raise both Rear and Front!View Detail
Drawing difficult to see translation (Please do not enter here. I ordered a certain famous thing immediately after using it. I immediately removed it from my favorite car It was a loss of cheap buying. Although it was quite disappointing shopping, it is self-owned. I learned that I have to watch firmly on Imp.View Detail
Compatibility with air-cooled Kawasaki ◎?
Assembled for 3 minutes, with Center Stand combined, heavyweight cars got a little up in one hand
Maintenance efficiency Up mistake ♪View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Serviço ao cliente
ORDENS
EM FORMAÇÃO
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING