16.84 EUR
(2,745 JPY)
15.38 EUR
(2,506 JPY)
(9% OFF)
5 (7 Todos os Comentários)
rating breakdown
5 Stars |
|
6 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
This is a must-have tool for anyone who does maintenance on their enginesIt is used for maintenance of MONKEY series Horizontal TypeEngine and OEM Clutch and Flywheel are very useful for fixing rotating objects
However, because of the universal tool that presses down on rotating objects, the tightening torque is When you use this product, you can use it with no problem You can use it with no problem if you degrease it well
Most Viewed Reviews Of MINIMOTO Pulley Holders
Excellent
Good tool if used as intended.This tool does what you want if you use it for its intended purpose. I bought the Husqvarna flywheel to hold while tightening the nut. Some said it failed and didn't do its job. Don't use it to change the oil filters in your car or load your ex-girlfriend's tire and it should work just fine.The safest non-destructive way to hold the flywheel for removal of the highly torqued nut. Could use a stronger clamping shaft to hold things while re-torquing the nut during installation. Bends a little too easily. Also, the vinyl coating on the band is slippery on a smooth flywheel surface. Powdered resin solves the slip issue.I've used this on a few motorcycles, Honda and Husky and it still looks and works as it should. I recommend it.View Detail
Excellent
Универсальное приспособлениеПриобрел данное приспособление для стопорения шкивов скутера (максискутера) при откручивании гаек на осях вариатора и торкдрайвера.Покупкой доволен!Очень полезный инструмент для замены ремня вариатора.I purchased this device for locking the pulleys of a scooter (maxiskuter) when unscrewing the nuts on the axles of the variator and the torc driver. Satisfied with the purchase! A very useful tool for replacing the variator belt.translated by Google TranslatorView Detail
Excellent
MINIMOTO Universal Holder MINIMOTO Universal Holder-A very good tool for locking the bell of the front or rear scooter variator when unscrewing nuts in a garage environment.View Detail
Excellent
Thoughts on using it[How is it used?
Used to remove Clutch and Pulley from Scooter
Was the one you received as per Image?
No problem as per Image.
How was your experience with it?
I have not had any inconvenience at all.
[Points to note]
The holes are positioned in the most comfortable manner (opening angle), and then tightened and secured in place.
How did it compare to other products?
The product is not different in usability compared to the well-known manufacturer's product used in the past, and this product can be recommended because it is less expensive.View Detail
Excellent
Convenient for everythingI bought this for maintenance of my scooter's drivetrain.
Until I purchased the Impact wrench, I had to hold the clutch outer with this product and remove it with the Ratchet wrench.
The plug-in type universal holder was difficult to use with the Clutch outer tightening torque, so I needed two types.
The price is very Reasonable and it is very easy to use.
I've been using it for about two years and it hasn't broken yet.
Now that I have purchased an electric impact wrench, I have less opportunity to use it on the drive train, but instead I use it around the crank and when removing the generator.
I feel that there are many opportunities to use it not only for Motorcycle, but also for cars.
Since it is variable and can be used for a variety of sizes, I think having one for now will come in handy later.
It is flat when placed on the ground, so it can be placed in the crevices of shelves, and I keep it hanging on the wall so it does not take up much space.
Sometimes when the lid of a bottle is too hard to open, I use this product, and it opens in one shot. However, be careful not to tighten it too much or it will break.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING