4.7 EUR
(770 JPY)
4.37 EUR
(716 JPY)
(7% OFF)
4 (41 Todos os Comentários)
Excellent
When you replace the Sprocket, you should also replace the Bolt.This is the Tapered Nut for DRC's Dura Sprocket. wr250X needs this because the OEMSprocket fixed bolt cannot be reused because the face is flat. The Dura Sprocket can last up to 20,000 miles if you keep up with maintenance, and it's a once in a few years expense, so it's time to replace it.
Reviews For DRC Pinhão cónico/pinhão cónico From Other Webike User
Excellent
new setup,great look,cheap fuseGreat sprocket bolt kit! The finish is slightly mat than OEM which looks awesome when paired with a new aftermarket sprocket.Great set of fasteners for replacing the stock ones. They are a little longer and the allen head used is a few sizes larger (doesn't round as easily) than the stock onesdid however have to tighten them again after my first ride. After that they have stayed tight.I'm glad i bought these as they work great. Much easier to tighten without being worried about stripping the things.webike too fast,Because it is packaged very well, it is subjected to extra inspection at customs.But the shipping fee is high.View Detail
Excellent
Is goodI replaced it with a Sprocket made by the company, so I purchased it at the same time.
It is a special product, so it can be used without any modification, and it can be used in a wide range of applications.
No problem.
It does not come loose and is adequate for performance.View Detail
Average
Installed on a WR250RI replaced the taper bolt because it was necessary when replacing the Sprocket, but I felt that it was a little too easy to lick the tool, so I think I'll use a different bolt next time.View Detail
Poor
Price is reasonable, note installation.Price is right.
Hexagonal Wrench has a large hole, making it difficult to fasten.
It is also easy to lick.
Strong Screw lock, Locktite is properly mandatory.
With a normal screw lock, it loosened immediately.
It can be used if one is careful and
I have no other complaints.View Detail
Very Good
I can use it without problems[How is it used?
I installed it on my D Tracker 125.
In order to install DRC's Dura Sprocket, you have to replace the OEM Sprocket bolt with this Taper bolt.
Dura Sprocket
https://www.webike.net/sd/21312642/
Was the installation difficult?
All I had to do was remove the OEM and replace it.
The OEM SprocketBolt comes with a screw lock agent, so after removing the OEM, you should clean up the screw lock agent debris.
How was your experience with it?
It worked normally
I will be happy if there is no rust in the future.View Detail
Most Viewed Reviews Of DRC Sprocket Bolt / Nut
Excellent
new setup,great look,cheap fuseGreat sprocket bolt kit! The finish is slightly mat than OEM which looks awesome when paired with a new aftermarket sprocket.Great set of fasteners for replacing the stock ones. They are a little longer and the allen head used is a few sizes larger (doesn't round as easily) than the stock onesdid however have to tighten them again after my first ride. After that they have stayed tight.I'm glad i bought these as they work great. Much easier to tighten without being worried about stripping the things.webike too fast,Because it is packaged very well, it is subjected to extra inspection at customs.But the shipping fee is high.View Detail
Excellent
Is goodI replaced it with a Sprocket made by the company, so I purchased it at the same time.
It is a special product, so it can be used without any modification, and it can be used in a wide range of applications.
No problem.
It does not come loose and is adequate for performance.View Detail
Average
Installed on a WR250RI replaced the taper bolt because it was necessary when replacing the Sprocket, but I felt that it was a little too easy to lick the tool, so I think I'll use a different bolt next time.View Detail
Poor
Price is reasonable, note installation.Price is right.
Hexagonal Wrench has a large hole, making it difficult to fasten.
It is also easy to lick.
Strong Screw lock, Locktite is properly mandatory.
With a normal screw lock, it loosened immediately.
It can be used if one is careful and
I have no other complaints.View Detail
Very Good
I can use it without problems[How is it used?
I installed it on my D Tracker 125.
In order to install DRC's Dura Sprocket, you have to replace the OEM Sprocket bolt with this Taper bolt.
Dura Sprocket
https://www.webike.net/sd/21312642/
Was the installation difficult?
All I had to do was remove the OEM and replace it.
The OEM SprocketBolt comes with a screw lock agent, so after removing the OEM, you should clean up the screw lock agent debris.
How was your experience with it?
It worked normally
I will be happy if there is no rust in the future.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING