[Tamanho]
largura : Aprox. 760mm
Comprimento dianteiro e traseiro : Aprox. 500mm
altura : Aprox. 520mm
[Material]
FRP
conteúdo
corpo da carenagem,conjunto de fixação,ecrã,conjunto de parafusos de ecrã
*Por favor, não se esqueça de verificar as precauções antes de comprar.
*Unidade de farol com projector LED de 7 polegadas" e o mesmo tipo de unidade de luz são utilizados.
*Uma vez que esta carenagem é um produto de uso geral feito no estrangeiro, pode ter alguns arranhões, arranhões e buracos que não se alinham, pelo que é necessária alguma modificação para a instalação. Por favor, certifique-se de que compreende o seguinte antes de comprar.
*A unidade luminosa pode interferir com a carenagem, caso em que a parte interferente da carenagem precisa de ser raspada.
*Há um caso em que o garfo e a carenagem interferem um com o outro, verificar o alcance do movimento de ambos os lados e, se interferir, é necessário rapar a carenagem.
*Outras peças interferentes precisam de ser cortadas ou raspadas.
*Para a unidade leve vendida separadamente, é necessário fazer um arnês de extensão do arnês principal.
*Dependendo da posição da carenagem, a estadia e o buraco da carenagem podem não estar alinhados. Neste caso, é necessário alargar o buraco da carenagem.
*Em alguns casos, os furos da tela e da carenagem não coincidem, caso em que é necessário fixar a tela com a porca do poço desde o furo central da carenagem até ao exterior, e depois alargar os furos com uma lima por ordem.
*Dependendo do lote, o buraco para a tela pode não ser perfurado do lado da carenagem. Nesse caso, por favor faça os furos de modo a caber no ecrã.
*Por favor, verifique com o seu veículo real, pois não poderemos responder a quaisquer perguntas relativas a modificações para além das listadas aqui.
*Não aceitamos quaisquer devoluções devido à impossibilidade de instalar o produto.
*Por favor, certifique-se de processar e instalar antes de pintar. Nenhuma reivindicação será aceite após a pintura.
*Há um caso em que há uma mudança de especificação da mercadoria pela conveniência do fabricante. Por favor, compreendam.
[Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
Components
Cowl body, bracket set, windshield, windshield screw set
*Please make sure to read the notes before purchasing.
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*For light units sold separately, it is necessary to make an extension harness from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.