[Número de unidades, conteúdo dos acessórios]
Corpo da fechadura de capacete
Manual do utilizador
[Cor, Material]
Feito de aço
Tinta preta
*Local de instalação: Remover o parafuso de montagem do suporte tandem de fábrica do lado esquerdo do veículo e inserir este produto no suporte. Se não tiver a certeza sobre a instalação, recomendamos que a mesma seja feita por uma loja profissional ou por um revendedor de automóveis.
*Por favor, não montar com um capacete pendurado neste produto a fim de evitar a queda do capacete.
*Alguns capacetes podem ser arranhados pela ponta da placa do calcanhar. Recomenda-se bloquear a placa do calcanhar colocando-a numa direcção em que não seja riscada ou protegendo-a com fita adesiva.
*Deixar arrefecer o silenciador de stock antes de usar o fecho do capacete.
*Se estiver preocupado com riscos no capacete ou na carroçaria do veículo quando utilizar este produto, considere a utilização de uma fita de protecção como a Película de Alta Protecção de Kijima (número do produto Kijima: 208-0851/208-0852).
*Se quiser comprar mais chaves sobresselentes para a parte da fechadura deste produto, verifique a direcção da ranhura da chave do produto que comprou (não é possível especificá-la na fábrica), e compre Kijima item número 303-1531KL se a ranhura estiver do lado esquerdo, ou Kijima item número 303-1531KR se a ranhura estiver do lado direito. Se a ranhura estiver do lado certo, peça a um serralheiro que lhe faça uma chave sobresselente.
*Se instalar este produto e quiser pendurar o capacete, ou quiser pendurar um capacete com cinto curto, ou quiser pendurar dois capacetes numa fechadura em caso de emergência, considere a possibilidade de utilizar o Porta-Chaves Kijima Helmet Assist.
Para capacetes com cinto de fixação de capacete D-ring de 20mm ou mais, número de produto Assist Kijima: P00024(Vermelho), P00025(Azul), P00026(Laranja), P00027(Verde), P00028(Gunmetal).
Assistência para capacetes com cinto de fixação do capacete D-ring inferior a 19mm Kijima número do artigo: P00029(Vermelho), P00030(Azul), P00031(Laranja), P00032(Verde), P00033(Gunmetal).
Desenvolvido para a era With With Corona e novos estilos de vida, o Item Assistente de Fechadura do Inferno de Cobre #: P00052 também está disponível em Cobre.
*Se desejar colocar o seu capacete favorito no assento ou no capacete do cavaleiro tandem após a instalação deste produto, por favor considere a utilização do fio de extensão de fixação do capacete Kijima (comprimento total 430mm).
Kijima item número: P00040(Preto), P00041(Fumo), P00042(Amarelo), P00043(Laranja), P00044(Rosa), P00045(Púrpura).
*Há um caso em que há uma mudança de especificação da mercadoria pela conveniência do fabricante. Por favor, compreendam.
[Quantity / Component]
・Helmet lock body
・Instruction Manual
[Color / Material]
・Made of steel
・Black paint
*Installation position: This product is installed by removing the stock pillion bracket mounting bolt on the left side of the vehicle and inserting this product into the bracket.If you are not sure, it is recommended that you have it installed at a professional shop or vehicle dealer.
*Please refrain from riding with helmet hanging on this product in order to prevent helmet from falling off.
*Some helmets may be scratched by contact with the tip of heel plate.It is recommended that you lock it by placing it in a direction where it will not be scratched or by protecting it with tape.
*Please allow the stock exhaust to cool off before using the helmet lock.
*If you are concerned about scratches on your helmet or vehicle body when using this product, please use KIJIMA's High Protection Film (KIJIMA product no: Please consider the use of guard tapes such as 208-0851 / 208-0852).
*If you would like to purchase a spare key for the lock of this product, please check the direction of the key groove of the product you purchased (it cannot be specified at the time of shipment from the factory), and if the groove is on the left side, KIJIMA item no: 303-1531KL, if the groove is on the right side KIJIMA item no: Please purchase 303-1531KR and ask a locksmith to make your spare key by yourself.
*Please consider using KIJIMA Helmet Fixing Assist Key Chain if you have installed this product and want to hang a helmet, a helmet with short belt, or two helmets on one lock in an emergency.
D-ring for helmet fixing belt for helmets with 20mm or more Assist KIJIMA Item no: There are 5 colors available: P00024 (Red), P00025 (Blue), P00026 (Orange), P00027 (Green), P00028 (Gunmetal).
D-ring for helmet fixing belt for helmets with 19mm or less Assist KIJIMA Item no: There are 5 colors available: P00029 (Red), P00030(Blue), P00031 (Orange), P00032 (Green), P00033 (Gunmetal).
Developed to prepare for the Corona era and new lifestyles: the Copper Hell Lock Assist Item Number: P00052 is also available in copper.
*If you want to put your favorite helmet on the seat or pillion rider's helmet after installing this product, please consider using KIJIMA helmet fixing extension wire (total length 430mm).
KIJIMA Item Number: There are 6 colors available: P00040 (Black), P00041 (Smoke), P00042 (Yellow), P00043 (Orange), P00044 (Pink), P00045 (Purple).
*There may be changes in product specifications due to the manufacturer's reasons.