peso : 0.15 lbs
[Incluído].
TST Modulador de Luz de Travagem
Kit Universal Wire
[Características]
Adicionar 3 modos de luz de travagem à luz traseira da bicicleta.
Modo de luz de travagem : Estroboscópio, pulso, intermitente
Tampa de cápsula removível para facilitar a programação do modo de luz.
É uma forma segura e fiável de alertar o condutor quando se está prestes a parar..
O kit de arame incluído pode ser utilizado para montar a maioria das luzes traseiras..
Manipula correntes até 4 amperes
*Se o manual de instruções estiver incluído, será em inglês.
*Há um caso em que há uma mudança de especificação da mercadoria pela conveniência do fabricante. Por favor, compreendam.
*PLEASE NOTE: The circuitry is designed to handle up to 4 amperes of current.
That means the unit can power up to two 27 Watt bulbs,or a single 54 Watt bulb.
In most of today's automotive tail lights,the light source is provided by LED's.
These lights typically draw less than one ampere of current and are well within safe specifications for current draw for our brake light modulator.
Older lighting systems still use incandescent bulbs rated in watts.
Each bulb has the wattage rating stamped or printed on it.
Please ensure your lighting system will be compatible with the maximums of current draw of the brake light flasher unit before you make your purchase.
*Please note this item is not DOT approved and may not comply with the laws and regulations in your area.
Weight: 0.15 lbs
[Included]
・TST Brake Light Modulator
・Universal Wire Kit
[Features]
・Add 3 brake light modes to your bike's taillight.
Brake light mode: Strobe, pulse, intermittent
・The removable capsule cap makes it easy to program the light mode.
・When you are about to stop, you can alert the driver safely and surely.
・Most taillights can be attached to the included wire kit.
・Handles currents up to 4 amps
*The instruction manual, if included, will be in English.
*There may be changes in product specifications due to the manufacturer's reasons.
*PLEASE NOTE: The circuitry is designed to handle up to 4 amperes of current.
That means the unit can power up to two 27 Watt bulbs, or a single 54 Watt bulb.
In most of today’s automotive tail lights, the light source is provided by LED’s.
These lights typically draw less than one ampere of current and are well within safe specifications for current draw for our brake light modulator.
Older lighting systems still use incandescent bulbs rated in watts.
Each bulb has the wattage rating stamped or printed on it.
Please ensure your lighting system will be compatible with the maximums of current draw of the brake light flasher unit before you make your purchase.
*Please note this item is not DOT approved and may not comply with the laws and regulations in your area.