Força para a paz de espírito
Um porta-motos só pode ser seguro se for concebido para ter em conta as cargas, tais como choques, que são transmitidas da motocicleta para o porta-motos não só quando a motocicleta está estacionária mas também quando está em movimento..
Se ocorrer uma avaria durante a condução, pode levar a um acidente grave devido à queda da carga..
Por esta razão, Endurance realiza medições de tensão por vibração do motor e impacto de queda, que também é realizada pelos fabricantes de veículos, e assegura o nível de resistência de qualidade por teste de resistência multifacetado..
Tentamos fazer produtos com "qualidade e robustez"..
Seleccione um produto fiável e siga a capacidade de carga especificada, etc., vamos desfrutar de uma vida de motocicleta segura e protegida!.
Este conjunto inclui um portador e uma caixa que são indispensáveis para a digressão.
A caixa vem com uma base de montagem especial, parafusos, porcas, suportes e borrachas para o suporte de enduro, pelo que é fácil de instalar e fixar..
Há um cinto dentro da caixa para fixar a bagagem, o que reduz o tremor da bagagem enquanto se conduz..
Revestimento resistente a arranhões e ferrugem
É acabado com duas camadas de revestimento por electrodeposição e revestimento em pó, que são utilizados para quadros de motocicletas e são resistentes a arranhões e ferrugem..
Compatível com uma variedade de caixas
Também é possível instalar vários top cases como GIVI BOX, K-MAX e SHAD, que são essenciais para a digressão.. (Fixado ao transportador com a placa ondulada fornecida com a caixa/base de uso geral)
O suporte do capacete pode ser fixado
Conjunto de Capacete Preto (EH507HANB1) pode ser fixado de ambos os lados..
Como pode usar o suporte do capacete com a caixa superior anexa, é útil manter o capacete na caixa superior quando este estiver cheio.. *Referência de imagem
Furo facultativo de Φ7
Pode personalizar o suporte de acordo com as suas próprias especificações, utilizando os orifícios de montagem de 7mm de diâmetro na parte de trás do suporte e os orifícios de montagem do suporte do capacete, fixando uma câmara traseira para a Drarecorder, um parafuso de gancho disponível comercialmente utilizando parafusos M6 ou um parafuso com olhal.. *Referência de imagem
Cumprimento das normas de segurança para luzes
Normas de segurança para luzes (a partir do centro da luz traseira, visível de um plano 15° acima do plano horizontal e de todas as posições 15° abaixo). *Alguns excertos)..
Foi concebido para um estilo óptimo quando o suporte é montado na carroçaria do veículo, mantendo ao mesmo tempo a visibilidade a partir da traseira..
●Reasured strength
Motorcycle carriers cannot ensure safety unless they are designed to take into account the impact and other loads transmitted from the motorcycle to the carrier not only when the motorcycle is stationary but also when it is in motion.
If a problem occurs during driving, it may lead to a serious accident due to a fall of the load.
For this reason, Endurance conducts stress measurements by engine vibration and drop impact, which are also conducted by vehicle manufacturers, and ensures a high quality strength level through multifaceted strength tests.
ENDURANCE is trying to make products with "quality and robustness".
Choose a reliable product and follow the specified loading capacity, and enjoy a safe and secure motorcycle life.
●This set includes a carrier and a box which are indispensable for touring!
The box is supplied with a special mounting base, bolts, nuts, brackets and rubber for the ENDURANCE carrier, so it can be mounted easily and safely.
There is a belt inside the box to fix the luggage, so it can reduce the shaking of the luggage while riding.
●Scratch and rust resistant coating
It is finished with two layers of electrodeposition coating and powder coating, which are used for motorcycle frames and are resistant to scratches and rust.
●Compatible with a variety of boxes
Various top case can be installed such as GIVI BOX, K-MAX, SHAD, etc. which is essential for touring.(Fixed to the carrier with the corrugated plate supplied with the universal box / base)
●Helmet holder can be attached
There are mounting holes for helmet holders on both sides, and a universal helmet holder set black (EH507HANB1) can be installed separately on both sides if necessary.
You can use the helmet holder with the top case attached, so it is useful to keep your helmet in the top case when it is full. *See image
●Φ7 option hole
By using the mounting holes for the Φ7 and helmet holder at the rear of the carrier, you can customize the carrier to your own specifications by attaching a rear camera for the DR-Recorder, commercially available hook bolts using M6 bolts or eyebolts. *See image
●Compliance with safety standards for lights
*with Some excerpts) Compatible
It is designed for optimum styling when the carrier is mounted on the vehicle body, while ensuring visibility from the rear.