A sua sua suavidade torna-o muito eficaz para superfícies curvas!
Disco abrasivo de metal para moedor de disco de 100mm.
Principalmente utilizado para remoção de cordões de solda, rebarbagem, remoção de ferrugem e polimento de superfícies planas curvas..
[Característica 1 - Suavidade única]
A característica é que o suporte do pano de polimento é muito pequeno e dobra-se muito, pelo que a pressão pode ser ajustada ao objecto, e é especialmente eficaz em superfícies curvas..
Nota: A imagem abaixo mostra as rugas que aparecem no objecto polido..
Como resultado, a pressão é dispersa, e é fácil de adaptar ao objecto e mostra o seu forte poder em superfícies curvas..
Este "software" é a única escolha para modelar superfícies de forma livre..
[Característica 2 - Alisamento Suave]
Porque a "flexão" característica do macio facilita o corte da parte saliente.
Tem a característica de ser adequado para suavizar..
*Uma das vantagens de "suave" é que pode ser alterada por meio de pressurização!.
[Característica 3 - Compatível com moinhos de baixa velocidade]
Pode ser usado com um moedor normal, mas também funciona bem com um moedor de baixa velocidade..
Para detalhes, consulte a parte inferior da página "Sobre a velocidade de rotação do moedor de disco"..
[Sobre a característica 4, Grindstone Alumina]
A mó do pano de polimento é de alumina para uso geral do metal..
O poder de polimento é inferior ao da zircónia, mas o acabamento é mais suave do que o da mesma espessura..
[Sobre a velocidade do moedor de disco].
Quando utilizado a baixa velocidade (baixa velocidade de rotação), a força centrífuga é reduzida, pelo que o contacto entre o disco de polir e a peça se torna mais suave..
Isto facilita a conformidade da forma do pano de polimento com a forma da peça, especialmente nos tipos "macia" e "ao ar" onde a influência de fixação na base é pequena, e facilita a execução de polimento e corte ao longo da forma das superfícies curvas..
Também é possível reduzir o desgaste, os danos, as mordeduras e os cortes causados pela dispersão de pano abrasivo..
*Também é fácil de operar uniformemente ao terminar, levando a uma redução dos riscos..
Por outro lado, no corte pesado, a velocidade de corte torna-se mais lenta devido ao impacto mais fraco e à menor carga de trabalho causada pela velocidade de rotação reduzida..
Para "Plano" e especialmente "Corte", recomendamos a utilização de um tipo de rotação geral de alta velocidade..
[moedor lento]
*É comum utilizar um moedor de discos com uma função de mudança de velocidade, baixa velocidade e alto torque, e um controlador de velocidade..
[compatibilidade com velocidades baixas e altas].
Baixa velocidade <ーー> Alta velocidade
Macio / Aéreo / Plano / Cortado
40/120/320
Its softness makes it very effective for curved surfaces!
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat curved surface polishing.
[Feature 1 - Flexibility applied by unique softness]
The feature is that the backing of the cloth is very small and bends greatly, so the pressure can be adjusted to the object, and it is especially effective for curved surfaces.
Supplemental: When it touches the object to be polished, it makes a burr as shown in the image.
This causes the pressure to disperse, making it easy to adapt to the object, and it is highly effective on curved surfaces.
This "software" is the best choice for modeling free-form surfaces.
[Feature 2 - Smoothing]
This is because the protruding part is easily shaved off by the soft's characteristic "bent".
It is suitable for making it smooth.
*It is also the good point of "Soft" that it can be changed by the way of pressurization.
[Feature 3 - Compatibility with low-speed grinders]
It can be used with a standard grinder, but it also works well with a low speed grinder.
For details, please refer to the section "Speed of the disc grinder" below.
[Feature 4 - Grindstone Alumina]
The grinding wheel of the abrasive cloth is alumina for general metal use.
Polishing power is inferior to that of zirconia, but the finish is milder than that of zirconia.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320