KEPSPEED Roda de alumínio tipo 8 buracos 8 polegadas / 5.5J
O [conjunto inclui].
Braço de baloiço
Roda
Amplo suporte de suspensão
Kit de Deslocamento da roda dentada frontal
Fixação do travão de tambor (esquerda e direita)
Vara de travão
Braço de travão de tambor de compensação
*É difícil de instalar no FI (Fuel Injection) Monkey porque a forma da cobertura do gerador é diferente. É necessária uma grande quantidade de modificações.
[Sobre a instalação]
*Este kit é para pneus de câmaras-de-ar. Os pneus e as câmaras de ar são vendidos separadamente.
*A unidade de tambor genuíno da Honda (cubo de tambor e unidade de travão de tambor) não está incluída no kit.
*Confirmámos que a unidade de tambor se encaixa nos cubos AB27 e 4L Monkey como o Z50J. Para outros centros, a compatibilidade é desconhecida. Pedimos desculpa por qualquer inconveniente que isto possa causar.
*Dependendo da diferença individual da unidade de tambor genuíno, o comprimento do parafuso de fixação da roda (parafuso de fixação da roda) do lado do tambor pode ser insuficiente. Neste caso, remover o parafuso de pino e utilizar o parafuso M8-20 para fixar a roda.
*O kit de desvio da roda dentada requer que a parte da roda dentada da cobertura do gerador seja cortada. Este kit é compatível com motores japoneses e motores Rongshin, mas alguns motores chineses como o Lihuan 150cc podem não ser capazes de suportar 4 pontos.
Por favor, utilizar as rodas dentadas de tamanho 420 para Macaco.
*As instruções de montagem estão incluídas no pacote. Consulte por favor o manual de instruções e monte-o cuidadosamente. No entanto, as técnicas de senso comum para trabalhos de manutenção não são descritas no manual de instruções.
*São necessários mecânicos de motocicletas experientes para realizar o trabalho de montagem.
*O número de armações da cadeia de transmissão varia em função do estado do veículo do cliente e das rodas dentadas dianteiras e traseiras, pelo que a GM-MOTO não fornece informações sobre isto.
*Mesmo quando a suspensão traseira está no fundo, certifique-se de verificar se existem pontos de contacto anormais antes de conduzir.
*Se houver um espaço de 0,5 mm ou mais entre a moldura e o braço oscilante, por favor use anilhas para reduzir o espaço.
*Se o eixo pivot for apertado com uma grande abertura, o braço oscilante será sujeito a uma carga elevada e poderá ser danificado no pior dos casos.
*Após o início da condução, prestar atenção à ocorrência do chamado "afrouxamento inicial" e realizar inspecções frequentes para evitar problemas inesperados.
[sobre garantia]
*Pequenos arranhões e arranhões podem ocorrer devido a problemas de transporte.
*A garantia não cobre defeitos que prejudiquem significativamente o valor ou função do produto.
*Não aceitamos a devolução do produto após a instalação, por qualquer razão. Não aceitamos a devolução do produto após a instalação, por qualquer razão.
KEPSPEED 8-hole type aluminum wheel 8" / 5.5J
[Set components]
・Swingarm
・Wheel
・Wide suspension support
・Front Sprocket Offset Kit
・Drum brake attachment (left and right)
・Brake Rod
・Offset Drum Brake Arm
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.
[About the installation]
*This kit is for tube tires.Tires and tubes are sold separately.
*HONDA stock drum unit (drum hub and drum brake unit) is not included in the kit.
*The installation of the drum unit has been confirmed for AB27 and 4L monkey hubs such as Z50J.The fitment of other hubs is unknown.
※Due to individual differences in the stock drum unit, the length of the stud bolt (wheel fixing bolt) on the drum side may be insufficient.In this case, remove the stud bolts and use M8-20 bolts to fix the wheel.
*The drive sprocket offset kit requires the sprocket portion of the generator cover to be machined off.However, some Chinese engines such as Lifan 150cc may not be able to support 4 points.
Please use the 420 size sprockets for Monkey.
※Assembly instructions will be included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain varies depending on the condition of the customer's vehicle and the front and rear sprockets, so GM-MOTO does not provide information on this.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
※GM-MOTO does not accept returns for any reason after the product has been installed.
*There may be changes in product specifications due to the manufacturer's reasons.