cor : prata
Orifício de montagem do punho : 22.2
Furos de montagem de espelhos : 10mm
*Se a sua bicicleta estiver equipada com um interruptor de alavanca genuíno quando substituir o suporte de alavanca por um suporte de alavanca de taco leve, a cablagem do suporte genuíno será também desligada do arnês principal, pelo que a célula não girará mesmo que segure a alavanca de embraiagem e pressione o botão da célula.
*Portanto, se ligar directamente os dois fios a partir do arnês principal, a célula irá girar.
*Se a cablagem não estiver desligada, é necessário modificar a cablagem, por isso, pedimos que a instalem numa oficina de motociclos.
*Note que se o próprio arame da embraiagem estiver enferrujado no interior e o movimento for pesado na bicicleta, é necessário substituir o arame por um novo para o tornar mais leve.
*Ao instalar o cabo de embraiagem, este deve ser instalado primeiro com a quantidade máxima de jogo no cabo de embraiagem, caso contrário, o cabo será plano e não poderá ser instalado.
*Após a instalação, por favor ajustar o jogo do fio ao estado normal.
*Este produto não pode ser instalado na Honda ou noutros veículos com uma caixa de interruptores esquerda integrada na parte de montagem da alavanca.
*Não disponível para os modelos da série CB750KO/K6/CB550F/CB500F/CB400F/CB350F/HAWK, etc.
Color: Silver
Handlebar mounting holes: 22.2
Mirror mounting holes: 10mm
*When you replace the lever holder with a light clutch lever holder, if your bike has a stock lever switch, the wiring for the stock holder will also be disconnected from the main harness, so the starter will not work even if you hold the clutch lever and press the starter button.
*Therefore, if you connect the two wires from the main harness directly, the starter will turn.
*If the wiring is not disconnected, it is necessary to modify the wiring, so please have it installed at a motorcycle shop.
*Please note that if the clutch wire itself is rusted inside and the movement of the bike is heavy, it will not become lighter unless the wire is replaced with a new one.
*When installing the clutch wire, first make sure that the clutch wire has the maximum amount of space before installation, otherwise the wire will become flat and cannot be installed.
*Please adjust the space of the wire to normal condition after installation again.
*This product cannot be installed on Honda or other vehicles with an integrated left switch box.
*Uninstallable models (CB750KO-K6 / CB550F / CB500F / CB400F / CB350F / All HAWK series models etc.)