Ao instalar este kit, a linha de óleo pode ser removida do lado esquerdo do motor e o refrigerador de óleo pode ser instalado..
No caso do CB900F e do CB1100F, a saída da linha de óleo que estava originalmente na panela de óleo é deslocada para o lado esquerdo do motor..
Também, cobrir a saída da linha de óleo na panela de óleo com a tampa cega incluída neste kit, ou mudar para a panela de óleo de stock CB750F sem saída da linha de óleo..
A capa está disponível em duas cores: prata e preto..
Vem com manual de instruções e lista de peças.
Em caso de danos devidos a capotamento, etc., podemos fornecer peças individuais..
Quando este kit é instalado, a cobertura da roda dentada de stock não pode ser instalada..
Se instalar o pedal de mudança nesta condição, o eixo do turno será desviado e poderá causar problemas tais como mau toque ou mudança de turno..
A mangueira de óleo não está incluída.
Preparar separadamente de acordo com a posição de instalação do núcleo do radiador de óleo, o encaminhamento da mangueira e a forma da peça de instalação do núcleo..
Além disso, usar por favor o parafuso de banjo M12XP1.5 para a parte da tampa..
By installing this kit, the oil line can be removed from the left side of the engine and the oil cooler can be installed.
In the case of CB900F and CB1100F, the oil line outlet which was originally located in the oil pan is relocated to the left side of the engine.
The oil line outlet on the oil pan can be covered with the blind cover included in this kit, or it can be changed to the CB750F stock oil pan without the oil line outlet.
The cover is available in two colors: silver and black.
Instruction manual and parts list are included.
In the event of damage due to tipping, etc., the parts can be supplied separately.
When this kit is installed, the stock sprocket cover cannot be installed.
If you install the change pedal in this condition, the shift shaft will be deflected and it may cause problems such as poor shift touch and inability to shift.
Oil hose is not included.
Please prepare separately according to the installation position of the oil cooler core, hose routing and the shape of the core installation part.
Also, use M12 x P1.5 banjo bolts for the cover part.