Braço oscilante: não tipo atarracado
Material: Alumínio
Largura Larga: Quantidade: Par (para esquerda e direita) Alargamento de 4,5 cm (Super superespeciais de 260 mm de largura)
China
* Este braço oscilante é um produto da KEPSPEED que fabrica peças de alumínio de alta qualidade.
* Este braço oscilante é projetado para ser usado sem ajuste, se você puder usá-lo com o kit completo.
* Como não verificamos o alinhamento da combinação com outros produtos da empresa, pedimos que você a reconheça.
* A haste do freio para o freio a tambor é vendida separadamente Por favor, compre de acordo com a largura e o comprimento do braço oscilante.
* Pessoas experientes em manutenção de motocicletas devem realizar o trabalho de montagem.
* O número de quadros na corrente de transmissão varia dependendo da condição do corpo do cliente e das rodas dentadas ao redor.
* Mesmo quando a suspensão traseira estiver no estado inferior completo, certifique-se de verificar se há um ponto de contato anormal antes de executar.
* Se a folga entre a estrutura e este braço oscilante for de 0,5 mm ou mais em cada lado, execute um processo para reduzir a folga com uma arruela ou algo semelhante.
* Quando o eixo pivotante é apertado em um estado com folga grande, é aplicada uma carga alta ao braço oscilante e, no pior dos casos, pode ser danificado.
* Por favor, preste atenção à ocorrência da chamada frouxidão inicial após o início da corrida e realize uma inspeção frequente para não causar problemas inesperados.
* Pequenos riscos e arranhões podem ocorrer devido a problemas no transporte.Não é coberto pela garantia, exceto para defeitos que prejudicam o valor ou a função do produto.
Swingarm: No Stabilizer
Material: made of aluminum
Wide width: 4.5cm wider on both sides (260mm width super wide specification)
made in China
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
*This swingarm is a product of KEPSPEED, a manufacturer of high quality aluminum parts.
*This swingarm is designed to be used without adjustment when the complete kit is used.
※GM-MOTO has not verified the consistency of the combination with other companies' products.
*Brake rods for drum brakes are sold separately.Please purchase according to the width and length of the swingarm.
*Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
*The number of tentioners of the drive chain will vary depending on the condition of your vehicle and the front and rear sprockets.
*Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
*If the gap between the frame and the swingarm is more than 0.5mm on each side, please use washers to reduce the gap.
*If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*There may be changes in product specifications due to the manufacturer's reasons.