・Fuel control for each individual cylinder in a smaller enclosure
Ajuste de combustível "Warm-up" (unidade lê a temperatura do motor e permite ajustes de combustível/temperatura com base na leitura)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer;9 volt adapter is no longer needed
・Two-position map-switching function built in
・Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear/speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
Utilitário de "bomba de aceleração" melhorado
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U. S. A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
Se a entrada da posição da engrenagem estiver ligada ao seu PCV, pode ajustar todos os injectores numa base "por engrenagem".
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
O modo "básico" permite-lhe ter uma única tabela de combustível que simplesmente coloca a mudança de combustível solicitada tanto nos módulos de injecção superior como inferior ao mesmo tempo. na mesma altura
・Adjust both upper and lower injectors by as much as +250/-100%
O modo "básico" é o ajuste perfeito para motores modificados que requerem mais combustível do que quatro injectores podem fornecer, mas não precisam da complexidade de mapear cada cilindro e cada engrenagem separadamente. O modo "básico" é o ajuste perfeito para motores modificados que requerem mais combustível do que quatro injectores podem fornecer, mas não precisam da complexidade de mapear cada cilindro e cada engrenagem separadamente
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
[Tradução].
Controlo de combustível para cada cilindro individual num pequeno recinto
Ajuste de combustível "Warm-up" (uma unidade que lê a temperatura do motor e permite ajustes de combustível/temporização com base na leitura)
Redução de tamanho a partir do PCIII USB
Fácil de instalar
USB fornecido pelo computador; o adaptador de 9 volts já não é necessário
Função de comutação de mapas em 2 posições incorporada
O interruptor Single Pole Single Throw (SPST) é adicionado para alternar entre dois mapas de combustível diferentes.
Entrada de engrenagem/velocidade permite o ajuste do mapa de engrenagens
Usando entradas analógicas, podem ser instalados sensores de 0-5V.
Criar uma tabela de ajuste baseada em entradas analógicas, tais como impulso ou temperatura
O Comandante do Poder V pode mapear cada cilindro individualmente..
Mais gama de afinação do que o PCIII USB
Utilitário de "bomba de aceleração" melhorado
Para Offroad e ATV, consultar o catálogo apropriado dos Comandantes de Força de Alce..
Feito nos EUA
Módulo de Combustível Secundário
O Sensor de Mudança Rápida Dynojet pode ser utilizado em 8 bicicletas injectoras para fornecer controlo adicional de combustível e função de mudança de velocidade.
Se a entrada da posição da engrenagem estiver ligada ao PCV, todos os injectores podem ser ajustados em "unidades de engrenagem".
Todos os 8 injectores podem ser ajustados.
Ver os gráficos de aplicação disponíveis
Ligação de um único cabo ao PCV
Ligar à calha superior do injector utilizando o conector OEM
Cada injector pode ser mapeado separadamente para completar um mapa com um máximo de 48 injectores.
No modo "Básico", pode ser preparada uma única tabela de combustível que alimentará a mudança de combustível solicitada tanto para os módulos de injecção superior como inferior em simultâneo.
Injector para cima / baixo + 250 / -100
O modo "básico" é o ajuste perfeito para um motor modificado que requer mais combustível do que quatro injectores, mas não requer a complexidade de mapear cada cilindro e cada engrenagem separadamente.
QUICK SHIFTER EXPANSION MODULE
O QEM permite que o sensor quickshifter da Dynojet seja utilizado com o Power Commander V em motociclos com oito injectores.
Uma vez instalado o sensor, a funcionalidade total do Quick Shifter pode ser utilizada.
O QEM está ligado ao injector superior, e depois ao PCV.
・Fuel control for each individual cylinder in a smaller enclosure
・Warm-up" fuel adjustment (unit reads engine temp and allows fuel / timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer; 9 volt adapter is no longer needed
・Two-position map-switching function built in
・It can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear / speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced “accel pump" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U.S.A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
・If gear position input is connected to your PCV, you can adjust all of the injectors on a “per gear" basis
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
・The “basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
・Adjust both upper and lower injectors by as much as +250 / -100%
・The “basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
[Translation]
・Fuel control for each individual cylinder in a small enclosure
・Warm-up fuel adjustment (a unit that reads engine temperature and allows fuel / timing adjustments based on the reading)
・Size reduction from PCIII USB
・Easy to install
・USB supplied from computer; 9 volt adapter is no longer needed
・Built-in 2-position map switching function
・Single Pole Single Throw (SPST) switch is added to switch between two different fuel maps
・Gear / speed input enables gear-based map adjustment
・Using analog inputs, 0-5V sensors can be installed
・Create an adjustment table based on analog inputs such as boost or temperature
・The Power Commander V can map each cylinder individually.
・More tuning range than PCIII USB
・Enhanced "acceleration pump" utility
・For Offroad and ATV, please refer to the appropriate Moose Power Commanders catalog.
・Made in USA
Secondary Fuel Module
・Dynojet Quick Shifter Sensor can be used on 8 injector bikes to provide additional fuel control and shifter function
・If the gear position input is connected to the PCV, all injectors can be adjusted in "gear units"
・All 8 injectors can be adjusted
・See the available application charts
・Single cable connection to PCV
・Connect to the upper injector rail using the OEM connector
・Each injector can be mapped separately to complete a map of up to 48 injectors
・In the "Basic" mode, a single fuel table can be prepared that will feed the requested fuel change to both the upper and lower injector modules simultaneously
・Up / Down Injector + 250 / -100
・The "basic" mode is the perfect setting for a modified engine that requires more fuel than four injectors, but does not require the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet quickshifter sensor to be used with the Power Commander V on motorcycles with eight injectors
・Once the sensor is installed, the full functionality of the Quick Shifter can be used
・QEM is connected to the upper injector, and then to the PCV