Conjunto completo com pedestal e parafusos necessários para a instalação.
Além disso, vem com o forro interno da caixa traseira de privilégios limitados apenas vendido como um conjunto..
Temos agora transportadores traseiros para os quatro modelos..
Yamaha YZF-R25 e YZF-R3, MT-25 e MT-03 utilizam cada um o mesmo motor e a mesma estrutura. Desenvolvemos um suporte traseiro que pode ser montado em quatro modelos diferentes, embora a configuração do veículo seja ligeiramente diferente..
O YZF-R25 apresenta capota e design que lembra super-desportivos, enquanto o MT-25 segue a imagem de um lutador de rua. Ambas as bicicletas têm uma imagem fina e nítida e são leves com um desempenho poderoso..
O suporte traseiro é uma parte prática, mas tentámos manter a imagem tão nítida quanto possível..
Concebido para ser tão afiado quanto possível, mantendo ao mesmo tempo espaço para o passageiro..
Para manter a imagem nítida e apertada da bicicleta, o quadro de suporte traseiro foi inicialmente trazido até à borda do assento.. Acabou por ser o desenho que eu pretendia, mas quando coloquei o passageiro no banco, estava demasiado apertado!.
Concebemos o assento do passageiro para ser ligeiramente mais largo do que a primeira amostra, de modo a dar espaço para um homem maior se sentar no assento do passageiro.. É apertado sem sacrificar o conforto dos passageiros..
A capacidade máxima de carga é de 5kg.. Reforcei todas as suas partes..
Recentemente, tornou-se comum instalar um suporte traseiro e uma caixa traseira como um conjunto mesmo para veículos super desportivos inspirados.. Algumas das caixas traseiras maiores podem pesar até 5kg, por isso reforcei cada parte da caixa e defini a capacidade máxima de carga para 5kg..
O reforço é colocado na estrutura onde o suporte traseiro é montado, e também nas pernas do corpo principal..
A forma ascendente das nádegas centra-se na praticidade e no design..
Quando a caixa traseira é instalada, há a possibilidade de a tampa se fechar por si mesma se estiver horizontal ou levantada para a frente quando a tampa é aberta.. É por isso que concebemos o porta-aviões traseiro de modo a que seja levantado na parte de trás.. O ângulo da carenagem caudal é o mesmo que o ângulo da carenagem caudal, pelo que o desenho tem um sentido de unidade..
Para instalar, remover a barra de agarrar do MT-25/03.. A YZF-R25/3 requer alguma perfuração da carenagem da cauda, mas nós concebemos a carenagem para minimizar a perfuração.. Também está incluído um padrão de papel para que se possa compreender facilmente a posição da perfuração do furo..
Full set with base and screws required for installation.
In addition, the set comes with a limited edition rear box inner.
■The rear carrier for the same four models is available.
Yamaha's YZF-R25 and YZF-R3, MT-25 and MT-03 each share the same engine and frame.Although the vehicle configuration is slightly different, World Walk has developed a rear carrier that can be adjusted to fit four different models.
The YZF-R25 has a cowling and design reminiscent of supersports, while the MT-25 follows the image of a street-fighter.Both bikes have a slim, sharp image and are lightweight with powerful performance.
The rear rack is a practical part, but World Walk designed it not to destroy the sharp image as much as possible.
■Designed to be as sharp as possible while retaining space for the passenger.
In order to keep the sharp and tight image of the bike, the frame of the rear rack was brought up to the very edge of the seat.The design of the vehicle is as World Walk wanted, but it is too tight for the passenger to sit on.
The passenger seat was designed to be slightly wider than the first sample to allow room for a larger man to sit in the passenger seat.It is a tight fit without sacrificing passenger comfort.
■Maximum loading capacity is 5kg.World Walk is reinforcing every part of it.
Recently, it has become common to install a rear carrier and a rear box as a set, even for super sports inspired vehicles.Some of the larger rear boxes weigh about 5kg, so I reinforced each part of the box and set the maximum load capacity to 5kg.
The reinforcement plate is placed on the frame where the rear carrier is installed, and also on the legs of the main body.
■The shape of the buttocks is designed for practicality and design.
When the rear box is installed, the lid may close by itself if it is horizontal or raised forward when the lid is opened.This is why the rear rack is designed to be raised backwards.The angle of the tail cowl is the same as the angle of the tail cowl, so the design has a sense of unity.
To install, remove the grab bar from MT-25 / 03.YZF-R25 / 3 requires drilling of some parts of the tail cowl, but World Walk has designed the cowl so that drilling of the cowl is minimized.A paper pattern is also included to help you know where to drill the holes.