matérias primas : aço
extensão : +6cm
[Sobre a instalação]
O método de instalação do próprio produto é o mesmo que o braço oscilante normal. Por favor, instale-o apropriadamente.
O comprimento efectivo do braço oscilante é aumentado em 6cm no ajuste mais curto da corrente de accionamento.
A posição de suspensão também foi deslocada para trás 6,5 cm.
Isto exigirá medidas como a extensão da cadeia de tracção, a substituição da suspensão traseira, e a recolocação dos pára-lamas traseiros.
Note-se que não podemos fornecer qualquer informação relativa ao comprimento da corrente de accionamento, suspensão traseira, ou recolocação do pára-lamas traseiro.
A estadia para a montagem da cobertura da corrente motriz está no local.
Mesmo quando a suspensão traseira está no fundo, certifique-se de verificar se existem pontos de contacto anormais antes de conduzir.
Se houver um espaço de 0,5 mm ou mais entre a armação e o braço oscilante, por favor use anilhas para reduzir o espaço.
Se o eixo pivot for apertado com uma grande abertura, o braço oscilante será sujeito a uma carga elevada e poderá ser danificado no pior dos casos.
Após o início da condução, prestar atenção à ocorrência do chamado "afrouxamento inicial" e realizar inspecções frequentes para evitar problemas inesperados.
[sobre garantia]
Pequenos arranhões e arranhões podem ocorrer devido a problemas de transporte.
A garantia não cobre defeitos que prejudiquem significativamente o valor ou função do produto.
Não aceitamos devoluções por qualquer razão depois de o produto ter sido instalado.
Além disso, os problemas após o início da condução são frequentemente causados por condições de condução, condições de manutenção, ou um desencontro com o estado do veículo, e são difíceis de distinguir das causas de produtos individuais.
*País de origem:China
Material: Steel
Extension: +6cm
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
[About the installation]
The installation method of the product itself is the same as the stock swingarm.Please install as appropriate.
The effective length of the swingarm is extended by 6cm at the shortest adjustment of the drive chain.
The suspension position has also been moved back 6.5 cm.
This will require measures such as extending the drive chain, replacing the rear suspension, and relocating the rear fenders.
GM-MOTO is not able to provide any information regarding the length of the drive chain, rear suspension, or rear fender relocation.
The bracket for mounting the drive chain cover is in place.
Even when the rear suspension is at full bottom, be sure to check for any abnormal contact points before driving.
If there is a gap of 0.5mm or more between the frame and the swingarm, please use washers to reduce the gap.
If the pivot shaft is tightened with a large gap, the swingarm will be subjected to a high load and may be damaged in the worst case.
After the start of driving, pay attention to the occurrence of so-called "initial loosening" and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
*Country of origin: China
*There may be changes in product specifications due to the manufacturer's reasons.