SP TAKEGAWA (Special Parts TAKEGAWA) lineups a number of big bore kit and customization parts mainly for 4MINI motorcycle like APE, MONKEY and GORILLA. Extremely popular because of its good performance and quality
 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
I have always pursued electronic meters. In addition to multi-functionality, I also hope that they can bring visual impact. I have been choosing for a long time but none of them can impress me, and th...
I installed this on my Honda XR100R and it was a very good upgrade from the stock shock. The performance was good a person weighing 175 lbs.
i bought again after a cuople of months later.its so qualıty and stable.i bought 2 more for my friends.it takes aprox.30 minutes for install.just for advice all installation charts are japon.if we tak...
I was looking for a small diameter breather hose to reduce the diameter from my 8 millimeter main crankcase breather hose down small enough to have a good sealing connection on the breather port on my...
If you are looking to do a custom install for a oil catch tank breather system on your motorcycle, this is a great one to go with. This oil catch tank has four ports for connecting to which is one mor...
Your are going to want this larger 12 millimeter inner diameter clear breather hose connected to your oil cap breather. The clear hose is handy for you to monitor and see of you have excessive moistur...
Special Parts Takegawa have all the replacement gaskets you are going to need for your Honda Money 125 or Honda Grom and available from Webike. I have a small oil leak from the left crankcase cover fr...
The M20 x P2.5 thread on this oil cap breather is the size you are going to want for your Honda Grom or Honda Monkey 125, took me a little researching to confirm this so thought I would mention this ...
My first Aluminum Wide Wheel Rim Kit, I chose SP Takegawa with Takasago EXCEL 17" rims because they look so cool. I used stainless spokes to highlight and contrast the difference between old hub and n...
I was looking for a slightly larger pod air filter to suit my installation. This oval taper air filter from Special Parts Takegawa was what I went with and has done the job nicely. The quality of the ...
 |  |  |
| | | |
 |  |  |
| | | |
This 143cc piston kit from Special Parts Takegawa to suit their 56 millimeter bore cylinder is a kit containing a piston, piston ring set, piston pin and piston pin circlips. All that you need to fres...
[How is it used?Especially Recommendation on Long Distance Touring!Was the one you received as per Image?Street ImageHow was your experience with it?I used it on a touring trip where I ran about 400km...
I bought it so that I can rehydrate quickly when I take a break during touring.I attached it to the webbing section on the SIDE of my REBEL 250 OEMSaddle Bag.It was easy to install, the texture of the...
The image was different from what I expected, it was MeshMaterial, I put GelSeat in it.The Cushion was made and it became comfortable, and the place where it was not good became slippery with Nylon me...
I installed it to prevent oil temperature of Grom.To be honest, I put it on with the hope that it would have some effect, but it worked better than I expected.It's a large oddity because it requires a...
Other companies' Emblem Bracket can be used for Horn relocation andIt was difficult for a novice to use it.But this Kit was easy to put on by myself.I worked on it at the same time as installing the d...
I had to wait over 3 months for delivery after ordering.Takegawa's Clutch has a different pitch from other manufacturers, so when I found this type, I fell in love with it at first sight.It was easy t...
The ADV150 Seat is stiff and I bought it to ease the burden.(Also, I personally didn't like Two-tone color's OEMSeat)It's breathable and comfortable, but it's also Cushioned, so it's more comfortable ...
The NORMAL Seat becomes steamy and uncomfortable after an hour of riding.I bought it because it was reasonably priced.JC92 will be M Size.The first thing I felt when I used the Seat cover was "My butt...
[How is it used?Used for 88 GORILLAWas the one you received as per Image?highWas the installation difficult?unspecializedHow was your experience with it?My last Clutch Cable lasted me about 10 years, ...
 |  | |
| | | |
| |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
| | | |
| | | |
| | |  |
| | | |
 |  |  |
| | | |
I am using the internal diameter 8 millimeter clear breather hose from Special Parts Takegawa in this photo and the usual 13.1 diameter hose clamp was not suitable to use with the breather air filter ...
These 9.5 diameter hose clamps from Special Parts Takegawa are used with their 5 millimeter internal diameter hose to create an excellent fit and seal in my breather hose setup. The hose clamps are ma...
Almost all the maintenance tools I have to work on my motorcycles are from Kitaco but I went with the one from Special Parts Takegawa for the pulley holder purely because it was cheaper, that might ha...
I purchased a Special Parts Takegawa catch tank kit that was not designed for my motorcycle and required additional 13 milimeter hose clamps to complete the installation. It is great that the included...
It's not impossible to use, but it was easy to come off because the hook was too weak.I think it would have been easier to use if there were no bumps in the patches.
I use it to remove the Flywheel on my LEAD 100.There is a similar product, Band, Belt, or Type, but I would like to use the Pin type which is highly universal.I chose theThe pin diameter of this produ...
This tool is required to pack a piece of Non-Seal Chain.When you change the number of chain pieces in Sprocket, you will need to change the number of chain pieces as well.
I am happy with this tool from Special Parts Takegawa. Instead of taking the motorcycle to the repair shop I decided to buy the special tools required and do the job myself which has saved me money so...
I know some people reuse them, but I'm a Type who replaces them with new ones.The price is not bad either.
The maintenance tools I have for my 2018 Honda Monkey 125cc are a mixture of Kitaco and Special Parts Takegawa. I purchased the pulley holder from Special Parts Takegawa as Webike had a good special o...
 | ||
| |
I bought a KIJIMA Helmet lock and installed it on the Tandem Footpeg and used it for a while, but the lock was too low for my use.It's not that KIJIMA Helmet lock is bad. The quality is good and it is...
 | ||
| |
Fashion costs. Style you have it or you don't. Wearing this Takegawa t-shirt you've got STYLE and FASHION without the cost! As Iv'e come to expect from Takegawa they have chosen a quality product to a...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
About our "Mybike" service 
![SP TAKEGAWA (Special Parts TAKEGAWA) [Substituição] Cabo de embreagem COMP.](https://img.webike-cdn.net/photo/impression/97/973c6eccc88ad0d8ffe971a3e2cde326M.jpg)
![SP TAKEGAWA (Special Parts TAKEGAWA) [Substituição] Braçadeira de mangueira](https://img.webike-cdn.net/uiu/impression/202110/21_1019027_6170d1010d804_M.jpg)
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING