- I replaced K-factory footpeg Type 3 for Bonamici racing footpeg that fell down on my Ducati StreetFighter 1098. The K-factory footpeg diameter is @22 same size and type with Bonamici, and can be reuse...consulte Mais informação
- Encaixa:
- KAWASAKI Z900RS 2BL-ZR900C
没觉得装上后换档有什么变化,完全没有,令人失望。
中国制造的同类产品,价格只有四分之一,我觉得这东西并没有什么技术含量。consulte Mais informação - It is not simply a ShiftRubber, but a structure that does not rotate with the ShiftRubber. Just simply tighten the bolt from the back side to fix it firmly. Since it is not a rubber but DURACON, there...consulte Mais informação
- Encaixa:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
Used unused BEETExhaust System with no Tandem FootpegBracket.It was attached without any problem, but later replaced with one made by BEET.Product is solid and beautifully built.K-fak is also a good B...consulte Mais informação - I have used Footpeg from various Manufacturers.The for-race Footpeg, which has even better gripping power than the regular Footpeg, costs more than 10,000 yen per pc, while the for-race Footpeg costs ...consulte Mais informação
- Encaixa:
- KAWASAKI Z900RS 2BL-ZR900C
使用时没有感觉和之前的变化,车友也有同样的反馈。如果有效,这么一个小玩意儿为什么各个车厂在设计时不考虑就装上呢?
----------------------------------------------------------
There is no feeling as before in use, and riders have the same feedback. If v...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
I used this item when I installed K-FACTORY's Slip-on Silencer, and it's a must-have item to get the maximum pushing angle. I haven't used the Tandem yet, so I haven't asked my passengers what they th...consulte Mais informação - Encaixa:
- KAWASAKI Z900RS 2BL-ZR900C
Il prodotto è perfetto ottima qualità in alluminio,la bronzina permette un ottima scorrevolezza del albero del cambio! Una volta montato l'albero del cambio risulta più saldo e le cambiate più dirette...consulte Mais informação - Encaixa:
- SUZUKI GSX1300R HAYABUSA 21-
I installed it at the same time as Babyface's Rear Sets.I don't know about individual installation, but after installing it at the same time as the Rear SetsI did notice that the Gear changing in Quic...consulte Mais informação - Encaixa:
- SUZUKI GSX1300R HAYABUSA 21-
If you use the OEM footpeg, the Shift feel will be harder and you will feel the same whether you have it on or off if you run for 30 seconds, but if you use the Rear Sets, the ShiftStroke will be shor...consulte Mais informação - Encaixa:
- SUZUKI GSX1300R HAYABUSA 21-
It's a common part, but it's very effective. it's just to put it on the shaft of the clutch, but it makes the shaft stable. It is the same type of shaft, but you can see the effect.consulte Mais informação - Encaixa:
- HONDA CB1300 SUPER BOLDOR 06-07
- HONDA CB1300 SUPER BOLDOR 08-13
- HONDA CB1300SB 14-18
- HONDA CB1300SF 05-07
- HONDA CB1300SF 08-13
- ...e mais.
Very well done footpegs, easy to install. They allow different positions. Now my bike looks better. Very satisfied of them.consulte Mais informação - Encaixa:
- KAWASAKI Z1000 (water-cooled) 10-13
- KAWASAKI Ninja 1000 (Z1000SX) 11-13
- KAWASAKI Z1000 (water-cooled) 14-16
I had an external Sprocket Cover installed and it needed to be Cut, but I personally have no problem with it.It's well built and rigid.consulte Mais informação - Encaixa:
- KAWASAKI Z1000 (water-cooled) 10-13
- KAWASAKI Ninja 1000 (Z1000SX) 11-13
- KAWASAKI Z1000 (water-cooled) 14-16
Z1000 (2016) mounted onIt is equipped with a stra**ker FOOTPEG and additional equipment.The NORMAL Shift rod was spec. in the Stoecker footpeg, but the long Shift rod was also new.FSprocket Cover was ...consulte Mais informação - Encaixa:
- SUZUKI DL1000 V-STROM250 17-21
- SUZUKI DL1000 V-STROM650 17-21
I tried to put it on my vSTROM650, but it's not engraved, and if I put Damper's on it, the hole would be blocked.consulte Mais informação - Encaixa:
- KAWASAKI ZX-6R 13-16
Back & Up just a little bit. You can install it between footpeg and Frame. It's not difficult to install.However, since the Brake Side is co-clamped with the Master Cylinder, it seems to need a little...consulte Mais informação - Encaixa:
- SUZUKI GSX-R1000 17-
- SUZUKI GSX-R1000R 17-
I feel like I might have gotten better.consulte Mais informação - Encaixa:
- KAWASAKI ZX-25R
Gear changing was sometimes sluggish, so I bought this thinking it might be an improvement.However, I almost solved the problem by readjusting the Pedal position while waiting for the arrival,...Due t...consulte Mais informação - I bought Repair Parts because I fell down.We have it in stock and were able to restore it immediately.It would be great if you could also purchase custom parts by selecting them from the Parts List.consulte Mais informação
- K-FACTORY KFACTORY K-FACTORY KFACTORY K-FACTORY Footpeg Bar type 3 is purchased because it uses this Manufacturer's Rear Sets.It grips enough to be used in a circuit, but I think it reduces quickly.Wh...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING