- The oil seal can be safely removed without damaging the surrounding gold.The shape of the tip makes it easy to catch the oil seal, so it does not slip off.The length is just right, making it easy to u...consulte Mais informação
- Simple construction makes it hard to break. It is strong and sturdy for its appearance.Even hard springs can be pulled firmly and safely.consulte Mais informação
- [How is it used?TZr250R (3XV) I bought this to Rose the Clutch ofUniversal's Clutch holder is available from several manufacturers, but I chose this product which was relatively inexpensive.Was the on...consulte Mais informação
- [How is it used?I use it for Oil replacement.The lid can be used on the go. You can take it home with you. Best.The spout also makes it easy to transfer the waste oil to a polyethylene tank or pail fo...consulte Mais informação
- [How is it used?I used this to replace the Clutch boss on my MT-07.Was the one you received as per Image?This is a general Clutch holder. There are several companies that sell the same shape.How was y...consulte Mais informação
- This is the first time I've done a Wiring hollow through. I was surprised at how easy it was to open. I think it is good to have it.consulte Mais informação
- Encaixa:
- HONDA glom
- HONDA APE 50
- HONDA MONKEY
The Size of the teeth do not match the GEAR of the Clutch on the Grom.It's not useless, but it's the same as chewing on the right stuff.consulte Mais informação - The price may be a little cheaper, but for the appearance, it is strong and durable. You can pull the hard spring and prevent the exhaust system from being scratched and you can use it safely.consulte Mais informação
- I'm glad I got it at a reasonable price, I used it for the Wiring middle passage and I think it's so easy to drill even if you can't come. It is very easy to make a hole.consulte Mais informação
- Encaixa:
- HONDA CUB press 50 (FNO.AA01-1000001-)
- HONDA CUB press 50 (FNO.C50-0200001-)
- HONDA CUB press 50 (FNO.C50-8900001-0095210)
- HONDA CRF50F (All AE03 models)
- HONDA DAX (All models of AB26)
- ...e mais.
Used for Clutch overhaul.You need to loosen the Bolt in the center of the Clutch lowers, but you need to hold the Rotor because it turns. So you need this tool.good pointYou can hold the Rotor firmly....consulte Mais informação - When I loosen the drain bolt to drain the oil, if I don't collect the bolt well, the bolt will fall into the hole to collect the oil like a cartoon. It was not possible to collect Bolts with disposabl...consulte Mais informação
- I used it only once to drill a hole in my HURRICANEHandlebar, and had no problems.consulte Mais informação
- Encaixa:
- HONDA CB900F 80-82 C
- HONDA CBX1000 72-82
- HONDA CB750F 83 SC
- HONDA CB1100F 83
- HONDA CB750F 79-82
- ...e mais.
I used it for CB750F.As with the OEM tool, the method of use is from the Plug side. Note that it cannot be lifted from the outside.Some people make their own tools because the OEM tools are out of pri...consulte Mais informação - Encaixa:
- HONDA DAX70 2-disc clutch
- HONDA MONKEY Normal clutch
- HONDA Honda50ccScooter
- HONDA MONKEY Primary side reinforced clutch
- HONDA LEAD 90
- ...e mais.
There is no Instruction Manual, but I was able to use it without any problems.I think it's a good tool to buy because it has several uses.consulte Mais informação - It can be removed and installed without destroying the threads of the stud bolt.consulte Mais informação
- It can safely pull out the oil seal without attaching the Wound to the oil seal or the surrounding Gold genus. The shape of the tip makes it easy to catch the oil seal and pull it out without slipping...consulte Mais informação
- Encaixa:
- KTM Hydraulic ClutchSpec. car
Time-consuming air removal is very efficient and convenient with this. It was easier to handle inhalation than injection. Work time is definitely reduced.consulte Mais informação - I wanted this one, which is the easiest among many similar products.You just need to drill the holes in the Handlebar correctly, so you don't need to waste spec.The simple is bestconsulte Mais informação
- In the case of a motorcycle with a lot of oil capacity, it may not be swallowed whole and may overflow, butA 1-litre or so motorcycle oil change can be stored for four or five oil changes without the ...consulte Mais informação
- Encaixa:
- HONDA CUB press 50 (FNO.AA01-1000001-)
- HONDA CUB press 50 (FNO.C50-0200001-)
- HONDA CUB press 50 (FNO.C50-8900001-0095210)
- HONDA CRF50F (All AE03 models)
- HONDA DAX (All models of AB26)
- ...e mais.
Used in a LITTLE CUB (AA01) Clutch replacementThe efficiency of your work will be significantly different without itIt is easy to remove the Impact, but it is difficult to manage the torque when tight...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING