- There is no explanation of how to use it, so at first, it is a bit difficult to understand. But once you know how to use it, you will be able to use it. I see. This is the caseIt is not used that ofte...consulte Mais informação
- I bought this to replace the Clutch Spring on my SA16 JOGZr (5SW7).There was this product and another one (41mm?), but I had no problem with this one.Price and texture were both good.consulte Mais informação
- Encaixa:
- YAMAHA MAJESTY250
- YAMAHA GRAND MAJESTY250
- YAMAHA MAJESTY125
- YAMAHA CYGNUS X
I thought it would be 2-3mm thin from the picture, but the Wrench I received was a solid 6mm thick. I used it for maintenance of the clutch, and it was good because it was thick and I did not have to ...consulte Mais informação - Encaixa:
- HARLEY-DAVIDSON
Required to replace the Oil Filter on the FXDL1450.The notch avoids the CrankPositionSensor.It may not be impossible to remove it with the regular Filter wrench, but it is very useful.consulte Mais informação - If you have a special oil filter wrench, you can use that one, if not, you can use this band. Especially when you own more than 10 cars, you don't remember which size is what, so you can use this!consulte Mais informação
- Encaixa:
- HARLEY-DAVIDSON
I bought it because I changed my motorcycle. for HARLEY is the sensor escape? (The notch in the picture) was important, but I couldn't see any reason why it would be particularly necessary for my Moto...consulte Mais informação - I usually use Socket wrenchI didn't have a Socket to remove the Nut or Bolt of this size, so I bought itHowever, the clutch lock nut has a high torque, and it was difficult to put pressure on it becau...consulte Mais informação
- Used with R25. I tried to replace the Oil Filter at the time of Oil replacement, but did not turn around and I could not use it just because the Oil Filter was recessed by tightening.consulte Mais informação
- I purchased KIJIMA 's Oil Element exchange. When exchanging it was Exactly to Oil Element, but because it was loose it was easily loosened by hand. I closed it a lot by hand, so it seems necessary...consulte Mais informação
- In order to wind the band around the Filter and turn the Filter with its sliding resistance, you must tighten it with Band firmly. Hang is necessary for tightening method, once push the tip of Handleb...consulte Mais informação
- Purchase for AX-1 Plug replacement. I thought I could use it because it is very narrow, but it was useless ... I think that it is good as a tool. I made a firm but I thought that the price could be a ...consulte Mais informação
- Encaixa:
- YAMAHA MAJESTY250
- YAMAHA GRAND MAJESTY250
- YAMAHA MAJESTY125
- YAMAHA CYGNUS X
Used for SecondaryOverhaul of CYGNUS X.Previously, I used a spinner handle with a 46 mm socket, but Nut slipped thinly in many cases.In KIJIMA 's Wrench, I put Nut on Wrench, with Clutch Body in p...consulte Mais informação - When you install Oil cooler of G Kura in CUB & Mongoli, ordinary Plug wrench can not be used, but acquaintance searched if agricultural machinery 's Plug wrench is good, but it searches with W...consulte Mais informação
- It is hard to use although purchased to the trial.
Since the portion of the root still carried out movable, it was able to do somehow, but it is hard to use this (smile).
consulte Mais informação - It used for live DioZX clutch exchange. Since it was a tool required for clutch exchange, it purchased.consulte Mais informação
- Since there was no in-vehicle tool, it purchased. since it was air cooling, a plug is deep and it was hard to take, but since this product arrived until quite deeply, it was able to be removed safely....consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING