- Encaixa:
- KAWASAKI ZX-9R 94 900cc
- KAWASAKI ZX-9R 03 900cc
- KAWASAKI ZX-9R 01 900cc
- KAWASAKI ZX-9R 02 900cc
- KAWASAKI ZX-9R 00 900cc
- ...e mais.
With the ZEPHYR750OEM Rotor, it is incompatible with brembo40?Casting, so I had to shave the pad and force the Speedometer to be placed, so I bought it anyway, including Φ320 conversion.In my installa...consulte Mais informação - Encaixa:
- KAWASAKI ZX-9R 94 900cc
- KAWASAKI ZX-9R 03 900cc
- KAWASAKI ZX-9R 01 900cc
- KAWASAKI ZX-9R 02 900cc
- KAWASAKI ZX-9R 00 900cc
- ...e mais.
Just when I was thinking about replacing my disc, a new Design came out that I like!I had to buy this one.PremiumRACING has a lot to choose from, so it was hard to decide.Decided by Standard Spec.The ...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 S 04
- KAWASAKI ZRX1200 S 03
- KAWASAKI ZRX1200 S 02
- KAWASAKI ZRX1200 S 01
- KAWASAKI ZRX1200 R 08
- ...e mais.
I share my experience in using the Sunstar rear brake disc. I bought a Sunstar rear brake disc for my Suzuki GSX motorcycle. Since the rear original brake disc has been in use for a very long time, it...consulte Mais informação - Encaixa:
- KAWASAKI ZZR1100 90-01
- KAWASAKI ZX-10 Setting for 88-90 530 conversion
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1100 II 97-00
- KAWASAKI ZEPHYR1100RS 92-07
- ...e mais.
Installed on ZrX1100.It's so much lighter than the OEM Steel.If you make the bottom of the spring lighter, you will also need to set the suspension. It is white in many ways.It's accurate and looks gr...consulte Mais informação - Encaixa:
- KAWASAKI W800 16
- KAWASAKI W800 15
- KAWASAKI W800 14
- KAWASAKI GPZ900R 92
- KAWASAKI W800 13
- ...e mais.
This is my second purchase due to wear and tear on the same product. There are some expensive products from the company in different shapes, but in terms of performance, they are more favorable than t...consulte Mais informação - Encaixa:
- KAWASAKI ZXR400 93
- KAWASAKI ZRX1100 99
- KAWASAKI ZXR400 91
- KAWASAKI ZXR400 92
- KAWASAKI ZX-9R 95
- ...e mais.
I later found out that the OEM disc diameter of BALIUS2 is 300mm. Caliper support is required to install this product. In this case it doesn't seem to fall under the warranty. There is a problem with ...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 S 02
- KAWASAKI BALIUS 96
- KAWASAKI BALIUSII 00
- KAWASAKI BALIUSII 01
- KAWASAKI BALIUSII 06
- ...e mais.
Because the rear disc has reached its usable limit, the front is also measured, and there are only a few left I preferred the OEM Design, but the price made me think of the I selected SUNSTAR When I r...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 R 04
- KAWASAKI ZRX1200 R 03
- KAWASAKI ZRX1200 R 02
- KAWASAKI ZRX1200 R 01
- KAWASAKI ZRX1100 99
- ...e mais.
When I measured the rest of the OEM disc when I replaced the rear tire, I decided not to look at it It was long, but I decided to replace it because it had reached its usage limit I haven't run it yet...consulte Mais informação - Encaixa:
- KAWASAKI W800 16
- KAWASAKI W800 15
- KAWASAKI W800 14
- KAWASAKI GPZ900R 92
- KAWASAKI W800 13
- ...e mais.
I think that it is abandoned now, but it is Rotor of Slit Type.I think that this one absolutely suits you to the old car!.The choice of Disc Rotor exchange is Sunstar one option.consulte Mais informação - Encaixa:
- KAWASAKI ZRX1100 II 97-00 Configuration for 520 conversion
- KAWASAKI ZRX1100 97-00 Configuration for 520 conversion
- KAWASAKI GPZ1100 95-99 Configuration for 520 conversion
- KAWASAKI ZEPHYR1100 92-07 Setting for 520 conversion
- KAWASAKI ZZR1100 90-01 Configuration for 520 conversion
- ...e mais.
Conversion from OEM 530 to 520. Duralumin, the number is the same 45 as OEM.More than 15 years have elapsed since the end of production, and there is no MODEL compatible with PCD and inner diameter (M...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1100 II 97-00 Configuration for 520 conversion
- KAWASAKI ZRX1100 97-00 Configuration for 520 conversion
- KAWASAKI GPZ1100 95-99 Configuration for 520 conversion
- KAWASAKI ZEPHYR1100 92-07 Setting for 520 conversion
- KAWASAKI ZZR1100 90-01 Configuration for 520 conversion
- ...e mais.
I used it in Chain 520 Conversion of OEMWheel.Weight is Aluminum 7075 so it is light. Compared to the same Material, it is heavier because it is thicker for 530. The appearance is simple with a calm c...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 S 02
- KAWASAKI BALIUS 96
- KAWASAKI BALIUSII 00
- KAWASAKI BALIUSII 01
- KAWASAKI BALIUSII 06
- ...e mais.
I bought it with Brembo caliper.I am satisfied with the compatibility well! I was worried with other Manufacturer but after all SUNSTAR is good COSPA ^ _ ^consulte Mais informação - Encaixa:
- KAWASAKI GPZ1100 99
- KAWASAKI GPZ1100 96
- KAWASAKI GPZ1100 98
- KAWASAKI BALIUSII 99
- KAWASAKI GPZ1100 95
- ...e mais.
I used the OEM Rotor, so I replaced it.Since Rotor is not cheap shopping, we made careful selection. This product had a lot of choices such as colors of Inner, Outer Rotor, RotorPin, so it was hard to...consulte Mais informação - Encaixa:
- KAWASAKI ZXR750 95
- KAWASAKI ZXR750R 91
- KAWASAKI ZXR750 93
- KAWASAKI ZXR750 94
- KAWASAKI ZXR750 92
- ...e mais.
I thought that it was a good opportunity as OEMRotor came to expiration date and I replaced it with semiFloating.I thought before running the purchase that I could suppress Running cost because I can ...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 R 04
- KAWASAKI ZRX1200 R 03
- KAWASAKI ZRX1200 R 02
- KAWASAKI ZRX1200 R 01
- KAWASAKI ZRX1100 99
- ...e mais.
Up to now I was using NORMALDeskThirteen years after purchasing a new car Mileage exceeding 60,000 K Desk also got worn out and baked and it did not lock Rear tire even if full Brake was done.However,...consulte Mais informação - Encaixa:
- KAWASAKI W800 16
- KAWASAKI W800 15
- KAWASAKI W800 14
- KAWASAKI GPZ900R 92
- KAWASAKI W800 13
- ...e mais.
NORMAL 's Rotor has been replaced by Sauce, so I replaced it.If the Front wheel comes off, we only remove Hewagonal's Screw, so there is no problem in terms of work. (For those who do not have...consulte Mais informação - Encaixa:
- KAWASAKI ZRX1200 R 04
- KAWASAKI ZRX1200 R 03
- KAWASAKI ZRX1200 R 02
- KAWASAKI ZRX1200 R 01
- KAWASAKI ZRX1100 99
- ...e mais.
I've replaced the OEM disc rotor which I had used for more than 10 years (88000km).The reason why I chose SUNSTAR was because it was made in Japan and had high quality.Moreover, both the SUNSTAR catal...consulte Mais informação - Encaixa:
- KAWASAKI ZZR1100 90-01
- KAWASAKI ZX-10 Setting for 88-90 530 conversion
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1100 II 97-00
- KAWASAKI ZEPHYR1100RS 92-07
- ...e mais.
In association with the first chain replacement for my GPZ900R (driven 30000km), which I had bought it as a new car, I have changed its rear sprocket to SUNSTAR duralumin type. I am content with its r...consulte Mais informação - Encaixa:
- KAWASAKI W800 16
- KAWASAKI W800 15
- KAWASAKI W800 14
- KAWASAKI GPZ900R 92
- KAWASAKI W800 13
- ...e mais.
It purchased from 310 Sizes to 320 Sizes for change.The Size became large and effectiveness's [ force and a Brake ] increased.Since it is cheaper than the Normal disk, it is recommended.consulte Mais informação - Encaixa:
- KAWASAKI ZZR1100 90-01
- KAWASAKI ZX-10 Setting for 88-90 530 conversion
- KAWASAKI ZRX1100 97-00
- KAWASAKI ZRX1100 II 97-00
- KAWASAKI ZEPHYR1100RS 92-07
- ...e mais.
Exchange of the Chain was considered, and if changed at any rate, it thought that the Sprocket whose gear tooth decreased would also be exchanged, and purchased.
Too, since the Sprocket was using SU...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING