- Encaixa:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...e mais.
About quality and texture
Has weight in it. Probably make in stainless steel on the metal part. Plastic cover is hard.
About the feeling of use
Brightness is enough not too bright and not to dark.
...consulte Mais informação - Encaixa:
- KAWASAKI Z1 (900SUPER4) 72-74
the studs on the emblem have a thin part and a thick part.
the thick part is actually where the clip grabs the stud.
the thick part on the front isnt long enough to allow the clip to grab it.consulte Mais informação - Encaixa:
- KAWASAKI Universal
- KAWASAKI ZEPHYR750
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z2 (750RS)
- KAWASAKI ZEPHYR1100
- ...e mais.
The quality is excellent and looks exactly like the 'old' Z Kawasaki's from the 1970's. Have had fitted for a while now, and look as good as when I put them on. Flexible enough metal to bend into the ...consulte Mais informação - Encaixa:
- KAWASAKI Z2 72-75
- KAWASAKI Z1 72-75
It is impossible for this Site rather than the product.After placing the order, I was told that the manufacturer would send me an e-mail with the bank account etc. after confirming the inventory, but ...consulte Mais informação - Encaixa:
- KAWASAKI Z2H2B
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI 250SS MACHI (S1) S1B
- KAWASAKI 250SS MACHI (S1) S1C
- KAWASAKI 400SS MACHII (S3)
- ...e mais.
The old one was still leaking gas, so we replaced it with a new one to refresh the system.No more leaks and it feels good to be clean.But be careful not to add too much Gasoline!It's always leaked bef...consulte Mais informação - Encaixa:
- KAWASAKI
Quantity:It helps that it is a Set.This area needs to be replaced if you are interested.consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI
I should have checked the availability of Logo before purchasing. Too bad.consulte Mais informação - Encaixa:
- SUZUKI
- SUZUKI
- KAWASAKI
- KAWASAKI
- SUZUKI
- ...e mais.
This temperature gauge is a very good idea. It should fit my bike very well and save me a lot of money compared to using a digital oil temperature gauge. And i love the analog style look. Just like th...consulte Mais informação - Encaixa:
- KAWASAKI Z750FX -1
- KAWASAKI Z900 (KZ900)
- KAWASAKI Z750-D1 (KZ750D) D1
- KAWASAKI Z750 (air-cooled) A4
- KAWASAKI Z750 (air-cooled) A5
- ...e mais.
I gave the mechanic this throttle wire, and he was impressed with the quality and fit. Today, I will pick my bike up and put this part to the test.consulte Mais informação - Encaixa:
- KAWASAKI Z2 (750RS)
- KAWASAKI Z1 (900SUPER4)
I have been without a KICK for 20 years, but I am reviving it for the sake of appearance.consulte Mais informação - Encaixa:
- KAWASAKI Z1000R
- KAWASAKI Z1100 GPZ
- KAWASAKI Z1100GP
- KAWASAKI Z1100R
- KAWASAKI Z2 (750RS)
- ...e mais.
It was used to divert the Sprocket of the Z system to Kawasaki's Zr-7S.As you may know, the shape of the sprocket nut on Zr-7S, ZEPHYR750, ZEPHYRχ and other relatively recent vehicles is different fro...consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI Z1-R/Z1-RII Z1 R-1
- KAWASAKI Z1-R/Z1-RII Z1 R-2
- KAWASAKI
- KAWASAKI
- ...e mais.
I bought this to install a Sprocket for a Z750FX on a Kawasaki Zr-7S.Although not originally compatible, I really wanted to install an 8mm Offset Sprocket, and since it was only available on the Z750F...consulte Mais informação - Encaixa:
- Others Universal
- KAWASAKI Z1 (900SUPER4)
- KAWASAKI Z2 (750RS)
These are really nice quality and look so much better then the stock mirrors. Note: they will shake at higher speeds (60 or higher mph) no matter how tight you make them.consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI
Since it is a Blank key, it should be possible to freely select the key number, or not to type the number.I would like one of you to do it.The texture etc. is the same as OEM.consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI Z1-R/Z1-RII Model 1
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...e mais.
I purchased this DOREMI product Gasket and left it with the parts at Motorcycle shop.Later, a shocking call.Oh, oh, call me if it doesn't fit lol.I'm hoping it's some kind of misunderstanding.Rated 3 ...consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI
- ...e mais.
Used for Drain hose on TM-MJN24.I think the Oil Resistant Hose sold at home centers is fine, but most of the ones sold at home centers are pink, and the long hose does not look good, so I bought it ev...consulte Mais informação - Encaixa:
- KAWASAKI Z1000
- KAWASAKI Z1-R/Z1-RII
- KAWASAKI Z1 (900SUPER4)
I think it's a product made in the same factory after all in any RiproManufacturer. It is puzzling that there is a gap in the price. In stock I wanted it right away, so I went with this one.consulte Mais informação - Encaixa:
- KAWASAKI
- KAWASAKI
I modified the License Plate Bracket to be able to mount the License Plate lying down.The price of used OEMTail lens base has been rising. These RiproParts are useful for processing.consulte Mais informação - Encaixa:
- KAWASAKI Z900
- KAWASAKI Z1000
- KAWASAKI Z2 (750RS)
- KAWASAKI Z750
- KAWASAKI S3A
- ...e mais.
Used on KawasakiZ1.I used it for the Base of Blinker Bracket's super shortening.The quality of Blinker Bracket is good in RiproManufacturer.The texture of the Plating and the shape of the Bracket is a...consulte Mais informação - Encaixa:
- KAWASAKI Zephyr 750 (Z2)
- KAWASAKI Zephyr X (FX)
- KAWASAKI Zephyr X (Z2)
- KAWASAKI Zephyr 750 (FX)
- KAWASAKI Zephyr 400 (Z2)
- ...e mais.
이 제품은 설치 후 상당히 만족스럽습니다.보기에도 클래식한 느낌을 주며 가격대비하여만족도가 높은 커스텀이 될것입니다.크롬으로 구매했으며 영문 글자들은 별도노 끼워넣어야 합니다.하지만 단점은 고정용 브라켓은 함께 동봉되어있지않아 설치에 어려움이 있습니다.그리고 영문 글자들이 잘 들어가지 않아힘을 많이 들여야합니다.
---------------------...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING