ALCAN hands Grip para Φ22 iGrip (i/Grip)
Fit with my bike Honda Rs150r, easy to install. Very comfortable with the this rubber. Fast delivery, wrap well and good quality with the price.
 |  |  |
 | ||
In the domestic, it is the Mach IV final type, H2C.Chrome plated fender and graphic of the same pattern as Mach I was adopted.It was exported abroad until mid - 1975.
| Deslocamento | 748 | Tipo de motor | Air-cooled/2-stroke/Piston Valve/Parallel 3-cylinder |
| Saída máxima (MA) | 74ps(54.0 kw)/6800rpm | Binário máximo (kgf / m) | 7.9kg・m(77.5N・m)/6500rpm |
| Peso do veículo (peso seco) | 192 | Capacidade do tanque de combustível litro | 17.0 |
ALCAN hands Xtreme grip PCG-011
End cap may be a little Slant in structure.The dimensions of the Throttle side are too Exactly, so a lot of force is needed to insert it.Considering the strength of each part, I think you need to insert it slowly with PRESS.Also, if you insert it to the root, it will interfere with the Handlebar in ...
NGK Ficha padrão B9HS 5810
[How is it used?Maintenance for consumable partsWas the one you received as per Image?As per Image, of course.Was the installation difficult?No problems with installation at all.How was your experience with it?No problem[Included Parts:were they on?It's not on.[Was there anything that disappointed y...
H.Craft Bobina de Ignição de Alta Potência 0,2ohm ...
I installed it on my TZr250R 3XV1. It was possible to install it as it was without processing if the Pitch conversion Bracket which is attached was removed.The quality is that the Cover of the Plug cord connection part is loose, and Waterproof processing is necessary.The effect is that the Engine is...
PMC(Performance Motorcycle Creative) sapatas de tr...
I haven't installed it yet, but it looks fine.Spring is enclosed, thank you.
DOREMI COLLECTION Z Winker estadia
I received the product today.I have not installed it yet, but the finish is good and the BlinkerCable terminal can be passed through without any problem.
ALCAN hands Gama Grip de Borracha Preta
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...
Dachi Spoke & Nipple Set KSR
I built it with the Takasago HRim, but as a result, after two rides, all of the outer side of the rear was broken, leaving only two legs. It seems that the neck of Spoke is too long to fit into the hole of the hub Exactly. It is hard to say because it is a combination with the external Rim. It is a ...
DOREMI COLLECTION Mangueira de Resistência a Óleo ...
It is soft for a fuel hose, and the accuracy is moderate, but it is so soft that the hose bends in the middle. If the hose is bent, the fuel will stop, so you need to check it from time to time and be careful with the handling.
(5.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING