Encaixa:- HONDA TACT 98-99 (AF51 Frame No. AF51-1000001-) Rear
- HONDA TACT 93-97 S (AF31 Frame No. AF31-1000001-) for rear
- HONDA TACT 93- TACT [TACT] Stand-up (Model AF30 Frame No. AF30-1000001-) for rear
- HONDA XR70R (Model:DE02 Frame NO:DE02-1000001-) For front
- HONDA XR100R (for competition) 90-01 (Model:HE03 Frame No:HE03-1000001-) for the rear
- ...e mais.
I think I've used the same one from OEM Product for 10,000km after replacing it, but it's not reduced much compared to the new one. butconsulte Mais informação
Encaixa:- HONDA CB50 S All models used X1
- HONDA APE 50 (FI vehicle) AC16-1600001- Number of use X1
- HONDA APE 50 AC16-1000001-1599999 Number of uses X1
- HONDA APE 100 TypeD All HC13 models Number of use X1
- HONDA APE 100 All years HC07 Number of uses X1
- ...e mais.
At the price of this product, I personally think it is very favorable, and it is still in two packages. Although I have not officially installed and used it, I hope it can be more durableconsulte Mais informação
Encaixa:- HONDA Giorno Sport 14-17 Front Carrying capacity:1 caliper NCH50
- HONDA Giorno Sport 11-15 Front:1 caliper NCH50C
- HONDA Giorno 11-18 Front Quantity:1 caliper NCH50B
- Others ZX50 93 BS VILLA REAR
- contains 1 caliper
- ...e mais.
I used it on my youngest son's QR50. Because it finally became MotorcycleDebut, I was given it at the Motorcycle shop in the neighborhood, so I quickly exchanged various things in Maintenance. I've us...consulte Mais informação
Simultaneous replacement to replace the plugOEMPlug cord with Cut and attached JointJust connect it, but depending on where you cut the cordIn the case of the Grom, the exterior must be removed.Joint,...consulte Mais informação
Encaixa:- YAMAHA DRAGSTAR125 5JX1 Required number:2
- YAMAHA RENAISSA 96- Required number of 4DN:2
- YAMAHA YB50 00- Required number:1
- YAMAHA YM80M Required number:1
- YAMAHA TT-R50E 06- Required number:1
- ...e mais.
I used to use OEM #6 and it burned too much and melted the Valve on the Head.So I raised the count and responded.Torque will go up when you Bore up, but it also puts more load on the engine, so it's b...consulte Mais informação
Encaixa:- YAMAHA DRAGSTAR125 5JX1 Required number:2
- YAMAHA RENAISSA 96- Required number of 4DN:2
- YAMAHA YB50 00- Required number:1
- YAMAHA YM80M Required number:1
- YAMAHA TT-R50E 06- Required number:1
- ...e mais.
My son became a small student and I gave him a TTR50. The father of the motorcycle shop in the neighborhood gave it to me, and it is running well. Because it is not easy to notice the deterioration of...consulte Mais informação
Encaixa:- HONDA NS50F 87-90 Rear Capacity:1 caliper
- HONDA MTX80S 80-82 HD06 Front Quantity:1 caliper
- SUZUKI TL125S Ihatovo 81 X Front Carrying capacity:1 caliper
- SUZUKI TL125S Ihatovo 81 X Rear Capacity:1 caliper
- HONDA MTX80RF 87 Rear:1 caliper (HD09/E516/0)
- ...e mais.
Not 1 star for quality.When I bought it, I checked it many times in the fitment table (TLR200), and when I received it and tried to install it 3 months after purchase, the Size was completely differen...consulte Mais informação
Encaixa:- HONDA CB125T 81- JC06 [Displacement] 125 [Required number] 2
- YAMAHA SRV250 92- S/T 4DN 92.4- [Displacement] 250 [Required number] 2
- SYM SYMPLY 50 13- AV05W1-7 [Required number] 1
- SYM SYMPLY 125 13- AV12W-6/AV12W5-6 [Required number] 1
- SYM GT 125EFI 13- HM12VA/HM12VB [Required number] 1
- ...e mais.
I changed to Windshield IRIDIUM because my D Tracker 125 was covering a lot. I don't know about the power because I don't have a keen sense to feel it. According to the manufacturer, it seems to have ...consulte Mais informação- Encaixa:
- YAMAHA DRAGSTAR125 5JX1 Required number:2
- YAMAHA RENAISSA 96- Required number of 4DN:2
- YAMAHA YB50 00- Required number:1
- YAMAHA YM80M Required number:1
- YAMAHA TT-R50E 06- Required number:1
- ...e mais.
Once a year, about once every 25,000?miles, but I've only changed it twice in two years at about 50,000?miles, and it's been running normally and well?I can't think of a second strike, but it's a quin...consulte Mais informação - Encaixa:
- HONDA CB125T 81- JC06 [Displacement] 125 [Required number] 2
- YAMAHA SRV250 92- S/T 4DN 92.4- [Displacement] 250 [Required number] 2
- SYM SYMPLY 50 13- AV05W1-7 [Required number] 1
- SYM SYMPLY 125 13- AV12W-6/AV12W5-6 [Required number] 1
- SYM GT 125EFI 13- HM12VA/HM12VB [Required number] 1
- ...e mais.
When I changed from the Normal plug to this one, the torque and peak power are clearly different. The price is more than twice as much, but the experience is much more different.consulte Mais informação - Encaixa:
- HONDA CB125T 81- JC06 [Displacement] 125 [Required number] 2
- YAMAHA SRV250 92- S/T 4DN 92.4- [Displacement] 250 [Required number] 2
- SYM SYMPLY 50 13- AV05W1-7 [Required number] 1
- SYM SYMPLY 125 13- AV12W-6/AV12W5-6 [Required number] 1
- SYM GT 125EFI 13- HM12VA/HM12VB [Required number] 1
- ...e mais.
The normal plug is totally different from the normal plug in terms of torque and punch at high rpm. Of course, it starts with a kick! The price is more than twice the price of NORMAL, but I think it i...consulte Mais informação - Encaixa:
- HONDA Super Cub delivery90 87 (MD90)[Used in] rear
- HONDA Super Cub delivery70 82-87 (MD70)[Used point]Front/Rear
- HONDA SUPER CUB70 86-95 (C70)[Used Points]Front/Rear
- HONDA Super Cub delivery90 82-87 (MD90)[Used point] Front
- HONDA SUPER CUB 90 86-95 (HA02)[Used point]Rear
- ...e mais.
I used the same one for the CUB, but I missed the adjustment of Brake and dragged it out, so I changed it. I could have removed the surface with Sandpaper, but I changed it because I used it for proba...consulte Mais informação - Encaixa:
- HONDA R&P
- HONDA CB50
- HONDA MAGNA50 (All models of AC13)
- HONDA DAX70
- HONDA Nauty Dax
- ...e mais.
It is used for XE50.The number of hinges, etc. remain OEM and have been replaced with worn out ones.It's a plain Parts with no flashy colors or anything like that, but as long as it does its job well,...consulte Mais informação - Encaixa:
- HONDA R&P
- HONDA CB50
- HONDA MAGNA50 (All models of AC13)
- HONDA DAX70
- HONDA Nauty Dax
- ...e mais.
Купил потому что уважаю бренд китако. При этом цена на звезду была очень демократичной. Сейчас взял 44 звена. Родная была на 46. Надеюсь будет ходить долго. Так же взял ведущую звезду и цепь китако. I...consulte Mais informação - Encaixa:
- HONDA Super Cub delivery90 87 (MD90)[Used in] rear
- HONDA Super Cub delivery70 82-87 (MD70)[Used point]Front/Rear
- HONDA SUPER CUB70 86-95 (C70)[Used Points]Front/Rear
- HONDA Super Cub delivery90 82-87 (MD90)[Used point] Front
- HONDA SUPER CUB 90 86-95 (HA02)[Used point]Rear
- ...e mais.
I replaced the OEMNORMAL product of SUPER CUB110 and used it (Rear side).CUBs have a higher ratio of rear brakes than regular motorcycles, so their braking performance and controllability are affected...consulte Mais informação - Encaixa:
- YAMAHA DRAGSTAR125 5JX1 Required number:2
- YAMAHA RENAISSA 96- Required number of 4DN:2
- YAMAHA YB50 00- Required number:1
- YAMAHA YM80M Required number:1
- YAMAHA TT-R50E 06- Required number:1
- ...e mais.
You can use it with confidence because NGK boasts TopShare.I don't even have a choice other than NGK before I'm lost...I don't know how it feels to use it, but it's NGK and I'm comfortable using it.consulte Mais informação - Encaixa:
- HONDA CB125T 81- JC06 [Displacement] 125 [Required number] 2
- YAMAHA SRV250 92- S/T 4DN 92.4- [Displacement] 250 [Required number] 2
- SYM SYMPLY 50 13- AV05W1-7 [Required number] 1
- SYM SYMPLY 125 13- AV12W-6/AV12W5-6 [Required number] 1
- SYM GT 125EFI 13- HM12VA/HM12VB [Required number] 1
- ...e mais.
I feel that the Normal plug is good enough, but for some reason I always want to use Windshield IRIDIUM.It's a single cylinder, so it's 1 pc, and it's hard to feel the difference from the Normal plug....consulte Mais informação - Encaixa:
- HONDA LITTLE CUB 02-13 C50LM for rear
- HONDA BENLY50CD90 96 CD90S Front
- HONDA BENLY50CD90 98 CD90 for rear
- HONDA BENLY50CD90 98 CD90 for front
- HONDA BENLY50CD50 96-97 CD50 for rear
- ...e mais.
It's less expensive than the OEM, and with Slit in the Shoe, it seems to work a little better. I didn't have any problems with the installation either. I'm happy with the product.consulte Mais informação - Encaixa:
- HONDA LITTLE CUB 02-13 C50LM for rear
- HONDA BENLY50CD90 96 CD90S Front
- HONDA BENLY50CD90 98 CD90 for rear
- HONDA BENLY50CD90 98 CD90 for front
- HONDA BENLY50CD50 96-97 CD50 for rear
- ...e mais.
I'm glad I bought these over the OEMs because they are cheaper than the OEMs. I didn't have any problems with the installation either.consulte Mais informação - Encaixa:
- YAMAHA DRAGSTAR125 5JX1 Required number:2
- YAMAHA RENAISSA 96- Required number of 4DN:2
- YAMAHA YB50 00- Required number:1
- YAMAHA YM80M Required number:1
- YAMAHA TT-R50E 06- Required number:1
- ...e mais.
Since the engine tuning of the CUB was done, it was purchased and installed to increase the heat value of the Plug.There are various expensive plugs such as RACING and Windshield IRIDIUM, but I have n...consulte Mais informação














?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING