- Encaixa:
- HONDA XR250 03-
- HONDA XR250 Motard 03-
I heard that there is a case that you need to widen the bolt with a drill when you pass it through the hollow part of the Axle Shaft on the front, but in my case, it was large and strong.However, ther...consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA CB1300 Super Four 03-21
- HONDA
- HONDA
- ...e mais.
It's only a Stem Nut, but it's a Stem Nut, and the texture of the aluminum and Black Anodized makes the texture around the Stem even better. The price is very reasonable.consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA CB1300 Super Four 03-21
- HONDA
- HONDA
- ...e mais.
The price was reasonable and it was worth replacing because of its visible location. The pure STD Nut is also a Polished PlatingNut, so I wasn't dissatisfied with it, but I've grown to love the Black ...consulte Mais informação - Encaixa:
- HONDA XR250MOTARD 03-
- HONDA XR250 03-
Because the Cap of OEM has become bad looking, Version up at the same timeBecause of the large surface area, it is installed with two birds with one stone to improve the cooling efficiency as well as ...consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
Initially, we used the OEM colors and looked for a color to make the vehicle stylish and lightweight! But I looked it up in the past and the existing product was antlion, so I didn't hesitate to buy i...consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
Initially, we used the OEM colors and looked for a color to make the vehicle stylish and lightweight! But I looked it up in the past and the existing product was antlion, so I didn't hesitate to buy i...consulte Mais informação - Encaixa:
- HONDA XR250MOTARD 03-
- HONDA XR250 03-
Excellent quality CNC item ! An item that I have looking for a long time... It gives a real factory racing look to your engine as well as a cooling effect... Thanks to WEBIKE and Antlion.consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
antlion oil filter cover it is very nice design and good quality product. i like very much. its cover are perfect fitted my xr250. would i recommend tanks we bike..consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
thanks we bike. if package received quickly.this sprocket guard are fitted perfectly on my xr250. part are branded and good quality .antlion the beast modifications part one the world..consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
I wanted to buy a gold color wheel collars, but with the same quality as the original. So here it is, product quality is awesome!consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
antlion motard chain guard it was very good quality.this parts are easly to replace.item desaing and color its very nice, thanks we bike,consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA CB1300 Super Four 03-21
- HONDA
- HONDA
- ...e mais.
I think the Antlion v2 nut is the best looking stem nut you can get. It's very light weight compared to the stock steel Honda nut. The M22 size fits perfect for my Dax. On the picture you can see it m...consulte Mais informação - Encaixa:
- HONDA XR250 03-
- HONDA XR250 Motard 03-
Aluminum Stopper not included.Even though it is relatively expensive, it does not inspect it and the shipment is sloppy..I decided to purchase seeking a sense of security.Really really bad.consulte Mais informação - Encaixa:
- HONDA XR250 03-
- HONDA XR250MOTARD 03-
It seems there is an adjustment range of -15 to -30, but if you lower it in the stretching direction, CushionArm comes into contact with Swingarm, so it seems that it can only be about -15 mm in the m...consulte Mais informação - Encaixa:
- HONDA XR250 Motard 03-
- HONDA XR250 03-
It is purchased before the Parts become less in XR 250 in the 10th yearI think at the time of Tire exchange, there is a high possibility of finding a Puncture repair in the mountain if you repair it!A...consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA CB1300 Super Four 03-21
- HONDA
- HONDA
- ...e mais.
It is often based on Black, I found this item and bought it quickly. But if you do not make Nut size the same as OEM, you will have to buy a Socketconsulte Mais informação - Encaixa:
- HONDA XR250MOTARD 03-
- HONDA XR250 03-
Replacing the CRM 50 with the digital meter of Magnetic Sensor, Original is a bit misplaced - - - I found the product to where I thought, "If you attach to CRM 250 CRM 50 - - - I tried to divert ...consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA CB1300 Super Four 03-21
- HONDA
- HONDA
- ...e mais.
OEM 30 mm, this item purchased 32 mm Socket and replaced.Although I was afraid because it was a stem, I was worried about the exchange, especially Nut would get scratched without difficulty, but I was...consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA CB1300 Super Four 03-21
- HONDA
- HONDA
- ...e mais.
Although there is a description with VTR 250 in the compatible model, in OEMTop Bridge Socket interfered with Top Bridge and could not be tightened.If you try to forcibly tighten you will lick Nut or ...consulte Mais informação - Encaixa:
- HONDA XR250 03-
- HONDA XR250 Motard 03-
I am an off-road type XR 250It will be MOTARD style.Installation is not as difficult as I thoughtWhen tightening the screw, it is natural that you do not fix the opposite side, but it will not stop.If...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING