Encaixa:- HONDA NC 750 S 12-19 700cc
- HONDA NC 750 X 12-19 700cc
- HONDA NC 750 D Integra 12-19 700cc
- HONDA NC 700 12-19 700cc
- HONDA CB 300 R 15-20 300cc
- ...e mais.
Prodotto molto valido , nel' honda msx 125 si adatta benissimo e si nota molto l' incremento di potenza, sono già due anni che lo uso tutti i giorni e mai un problema, anche in presenza di big bore sv...consulte Mais informação- Encaixa:
- HONDA BENLY PRO 12-20 Front Quantity:1 caliper
- MW502WH
- HONDA Air Blade 125 16-19 Rear Capacity:1 caliper ACA125CBF
- HONDA BENLY PRO 12-20 Rear
- capacity:1 caliper
- ...e mais.
The braking force and the amount of stepping to lock are better than OEM and easy to handle, but Dust is a little too much. Because it is not easy to fall, even if Drum rotates, it seems that Dust doe...consulte Mais informação - Encaixa:
- TRIUMPH America 07-08 Front quantity:1 caliper
- TRIUMPH America 06-17 Front quantity:1 caliper (Cast wheel)
- TRIUMPH America 03-06 Front Quantity:1 Caliper Cast Wheel
- TRIUMPH Adventurer 96-97 Front quantity:1 caliper
- TRIUMPH Adventurer 96-01 Front quantity:1 caliper
- ...e mais.
The OEM Pad wore out quickly, so I chose this one to test it out. The cost performance is high.consulte Mais informação - Encaixa:
- APRILIA SCARABEO200 13 for Front
- HONDA PS150 01 for Front
- HONDA SH125 13 for Front
- HONDA SH150 for Front
- KAWASAKI GPX250/R/R2 for Front 86
- ...e mais.
(I'll post the same review for the 130/80-16 64H TL)For my recently purchased GPX250RII, I added the following front and rear sizes to the Quantity:I bought it as a set100/80-16 50H TL130/80-16 64H TL...consulte Mais informação - Encaixa:
- HYOSUNG RX125 99- [Required number] 1
- HONDA MAGNARS 93- RC43 93.7- [Displacement] 750 [Required number] 4
- KYMCO Ve Knocks 250 [Required number] 2
- HONDA HORNET600-S 98- PC34 98.3- [Displacement] 600 [Required number] 4
- HONDA MAGNA 93- RC43 93.7- [Displacement] 750 [Required number] 4
- ...e mais.
Because it was replaced with a new one, the start of the Engine became better and it was good.I think I'll be buying the same one again!Shipping was fast and helpful!consulte Mais informação - Encaixa:
- HONDA ST1100 90- 【Displacement volume】 1100 [Required number] 4
- HONDA Byte 02- AF59 02.1- 【Displacement volume】 50 [Required number] 1
- HONDA SILVER WING 01- NF01 01.11- 【Displacement volume】 400 [Required number] 2
- HONDA CBF250 04- Reverse import 【Displacement volume】 250 [Required number] 1
- HONDA PANTHEON125 04- Reverse import 【Displacement volume】 125 [Required number] 1
- ...e mais.
I prefer the Windshield IRIDIUM box because it has a more luxurious lookIt is twice as durable as Windshield IRIDIUM, which makes it easier on your Wallet and more comfortable for you It isI can't wai...consulte Mais informação - Encaixa:
- HONDA ST1100 90- 【Displacement volume】 1100 [Required number] 4
- HONDA Byte 02- AF59 02.1- 【Displacement volume】 50 [Required number] 1
- HONDA SILVER WING 01- NF01 01.11- 【Displacement volume】 400 [Required number] 2
- HONDA CBF250 04- Reverse import 【Displacement volume】 250 [Required number] 1
- HONDA PANTHEON125 04- Reverse import 【Displacement volume】 125 [Required number] 1
- ...e mais.
I bought it in advance as I was almost ready to replace itI've been using NGK's Windshield IRIDIUM for a while now, so I don't notice any dramatic changes I think, but I'm hoping for double the durabi...consulte Mais informação - Encaixa:
- HONDA BENLY PRO 12-20 Front Quantity:1 caliper
- MW502WH
- HONDA Air Blade 125 16-19 Rear Capacity:1 caliper ACA125CBF
- HONDA BENLY PRO 12-20 Rear
- capacity:1 caliper
- ...e mais.
I replaced it while I was replacing the TireIt's new, so of course it works perfectlyRear locking is easy to do, tooIt works well enough on a rainy day to allow you to break in without worryNow it's j...consulte Mais informação - [Was there anything that disappointed you?NoneDo you have any wishes or improvements you would like to make for the Manufacturer?It is perfect if the logo position is horizontal and perpendicular to t...consulte Mais informação
- Encaixa:
- HONDA X11 Eleven SC42 [Displacement] 1100 [Required number] 4
Ordinary Plug and Windshield IRIDIUMTo be honest, I can't really see much of a difference in terms of experience, but I'm not sure if it's a 250+ car body I would use Windshield IRIDIUMI bought it for...consulte Mais informação - Encaixa:
- HYOSUNG RX125 99- [Required number] 1
- HONDA MAGNARS 93- RC43 93.7- [Displacement] 750 [Required number] 4
- KYMCO Ve Knocks 250 [Required number] 2
- HONDA HORNET600-S 98- PC34 98.3- [Displacement] 600 [Required number] 4
- HONDA MAGNA 93- RC43 93.7- [Displacement] 750 [Required number] 4
- ...e mais.
I installed it on my CBR400RRI've personally experienced Windshield IRIDIUM not coming back to life once it's been covered We use the Normal plug for Carburetor VehiclesAlso, Carburetor Vehicles is ea...consulte Mais informação - Encaixa:
- YAMAHA VIRAGO250 91-92|94|96 (Models:3DM6
- 3DM5
- 3DM8
- 3DM7
- 3DMA
- ...e mais.
Even though the Winter Gloves look so warm, when the temperature goes down in earnest, my fingertips will still get cold It's coldFor hand protection, nothing beats a Grip heaterI've worn it on my old...consulte Mais informação - Encaixa:
- HONDA ST1100 90- 【Displacement volume】 1100 [Required number] 4
- HONDA Byte 02- AF59 02.1- 【Displacement volume】 50 [Required number] 1
- HONDA SILVER WING 01- NF01 01.11- 【Displacement volume】 400 [Required number] 2
- HONDA CBF250 04- Reverse import 【Displacement volume】 250 [Required number] 1
- HONDA PANTHEON125 04- Reverse import 【Displacement volume】 125 [Required number] 1
- ...e mais.
I put it in my XR250 with 33,000k miles on the clock I can't help but feel like I'm reacting faster to Axel operations inIf you say it's just my imagination, that's allconsulte Mais informação - Encaixa:
- YAMAHA VIRAGO250 91-92|94|96 (Models:3DM6
- 3DM5
- 3DM8
- 3DM7
- 3DMA
- ...e mais.
V-strom650 2018 (Installed on C733A)https://www.tk-kijima.co.jp/topics/news_detail.html?code=78good pointThrottle cone in one unit so you don't have to do OEM throttle processing etc So you can save y...consulte Mais informação - Encaixa:
- HYOSUNG RX125 99- [Required number] 1
- HONDA MAGNARS 93- RC43 93.7- [Displacement] 750 [Required number] 4
- KYMCO Ve Knocks 250 [Required number] 2
- HONDA HORNET600-S 98- PC34 98.3- [Displacement] 600 [Required number] 4
- HONDA MAGNA 93- RC43 93.7- [Displacement] 750 [Required number] 4
- ...e mais.
But when I ordered a normal order from my phone, they sent me a 3-handed distribution package (and other items I bought with it) It didn't work outWhat is We-Big?When I contacted Support, I was told t...consulte Mais informação - Encaixa:
- HYOSUNG RX125 99- [Required number] 1
- HONDA MAGNARS 93- RC43 93.7- [Displacement] 750 [Required number] 4
- KYMCO Ve Knocks 250 [Required number] 2
- HONDA HORNET600-S 98- PC34 98.3- [Displacement] 600 [Required number] 4
- HONDA MAGNA 93- RC43 93.7- [Displacement] 750 [Required number] 4
- ...e mais.
But when I ordered a normal order from my phone, they sent me a 3-handed distribution package (and other items I bought with it) It didn't work outWhat is We-Big?When I contacted Support, I was told t...consulte Mais informação - Encaixa:
- HONDA ST1100 90- 【Displacement volume】 1100 [Required number] 4
- HONDA Byte 02- AF59 02.1- 【Displacement volume】 50 [Required number] 1
- HONDA SILVER WING 01- NF01 01.11- 【Displacement volume】 400 [Required number] 2
- HONDA CBF250 04- Reverse import 【Displacement volume】 250 [Required number] 1
- HONDA PANTHEON125 04- Reverse import 【Displacement volume】 125 [Required number] 1
- ...e mais.
i installed it on a cb250r Results Did it not fit? This is my impression The whole ride is slippery and Standard Equipment's Iridium I don't have the crispness of the ride that I had with the plugs an...consulte Mais informação - Encaixa:
- HONDA ST1100 90- 【Displacement volume】 1100 [Required number] 4
- HONDA Byte 02- AF59 02.1- 【Displacement volume】 50 [Required number] 1
- HONDA SILVER WING 01- NF01 01.11- 【Displacement volume】 400 [Required number] 2
- HONDA CBF250 04- Reverse import 【Displacement volume】 250 [Required number] 1
- HONDA PANTHEON125 04- Reverse import 【Displacement volume】 125 [Required number] 1
- ...e mais.
This is an in-play for the CBR400RR/NC29I used the OEM Plug for about 10,000 km with little or no change in starting and running fee-ringing It was probably still usable, but after fire as soon as it ...consulte Mais informação - Encaixa:
- HYOSUNG RX125 99- [Required number] 1
- HONDA MAGNARS 93- RC43 93.7- [Displacement] 750 [Required number] 4
- KYMCO Ve Knocks 250 [Required number] 2
- HONDA HORNET600-S 98- PC34 98.3- [Displacement] 600 [Required number] 4
- HONDA MAGNA 93- RC43 93.7- [Displacement] 750 [Required number] 4
- ...e mais.
This is a very limited model number, so Home Center is not able to handle NoneMany times even the motorcycle supply stores don't have it in stock, and I'm very grateful for the fact that I can get it ...consulte Mais informação - Encaixa:
- HONDA ST1100 90- 【Displacement volume】 1100 [Required number] 4
- HONDA Byte 02- AF59 02.1- 【Displacement volume】 50 [Required number] 1
- HONDA SILVER WING 01- NF01 01.11- 【Displacement volume】 400 [Required number] 2
- HONDA CBF250 04- Reverse import 【Displacement volume】 250 [Required number] 1
- HONDA PANTHEON125 04- Reverse import 【Displacement volume】 125 [Required number] 1
- ...e mais.
When I heard that the long-awaited RutheniumPlug for motorcycles was released, I jumped on it right awayThis is a replacement from NGK's Iridium plugsIt's great, isn't it, the core is made of Rutheniu...consulte Mais informação

















?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING