- Encaixa:
- HONDA Click125I 12-16
- HONDA AIR LADE125 14-15
- HONDA SHMODE All JF51 models
- HONDA PCX150 All KF12 models
- HONDA PCX150 All KF18 models
- ...e mais.
I am purchasing Repeat for my PCX (JF56).This time, it was replaced together with an overhaul of the drive train (total replacement) as it had reached 50,000 km.The last time it was replaced was aroun...consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
[How is it used?Purchased for maintenance of ADV150 purchased used (approx. 6,000 km).The back Gold mesh is removed and installed to increase inhalation efficiency.At the same time, the air intake Hos...consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
I tried to fit the air filter into the FilterBOX.The air filter I purchased was deflected, and when I fixed the deflection by hand, the air filter I purchased broke in half. (Angry) 。I realized that c...consulte Mais informação - Encaixa:
- HONDA PCX125 10-11
[How is it used?PCX125 (JF28) It is used forHow was your experience with it?I don't know about the effect of these parts.Since it's a PeLePera, it's very difficult to install unless you fix it with Ta...consulte Mais informação - Encaixa:
- HONDA PCX125 JF28-1000001-1099999 10-11
This type of Element cannot be washed and reused due to its structure.I don't mind because it's cheap at all.[How is it used?I'm using it on my PCX125, it's a 2012 model with about 18,000km on the odo...consulte Mais informação - Encaixa:
- HONDA PCX125 New PCX [ESP] engine
- HONDA PCX125 12-21
- HONDA PCX125 10-11
Stocked at JF12 because it was the lowest price.JF30 is not in the fitment list, but it can be installed Exactly as shown in the picture.It's a consumable item so I appreciate the price.consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
Purchased because it is the lowest price.It can be installed without any problem as same as OEM Product.It is a consumable item so this price is very helpful.consulte Mais informação - Encaixa:
- HONDA
- HONDA
- HONDA
- HONDA
- HONDA
- ...e mais.
As a product, there was no BALIetc. and it was clean.No rattle, just fit.I would like to buy the next one if the durability is good because it has not been installed for a long time.consulte Mais informação - Encaixa:
- HONDA CBR500R
- HONDA Rebel300
- YAMAHA Tricity155
- HONDA CB500X
- HONDA CB300R
- ...e mais.
The KN Planning [UmaRacing] Oil Breather it's a big help to my zoomer engine to cool down even in a long ride. It is highly recomended that you use a KN oil breather for your bike.consulte Mais informação - Encaixa:
- HONDA PCX125
- HONDA PCX150
- HONDA SPACY125
- HONDA LEAD125
- KYMCO GRAND DINK125
- ...e mais.
very good product and the Webike pakaging is really outstanding and fast delivery too. Will purchase again for another product.consulte Mais informação - Encaixa:
- HONDA PCX125 10-11
- HONDA gyro canopy (TA03)
- HONDA gyro canopy (4ST)
- HONDA Dio 110. JF31
- HONDA
- ...e mais.
OEM Replacement Type of RearShoe.I think it's good because there doesn't seem to be any quality problems at a quick glance.I haven't installed it yet, so I don't know how it feels, but I think it will...consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
Replaced OEM with this product this time.It's inexpensive and I haven't had any problems using it at all.consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
The texture was good to look at, and the fitting was fine. I am satisfied with this quality at a reasonable price.consulte Mais informação - Encaixa:
- HONDA Click125I 12-16
- HONDA AIR LADE125 14-15
- HONDA SHMODE All JF51 models
- HONDA PCX150 All KF12 models
- HONDA PCX150 All KF18 models
- ...e mais.
I installed it on my PCX125 (JF56) for commuting.I used to use the OEM Product (see photo below), but this product is less than half the price of the OEM, so I chose this one this time.I have installe...consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
[How is it used?for ReplacementWas the one you received as per Image?Street ImageWas the installation difficult?I don't know because I haven't replaced it yet.How was your experience with it?I don't k...consulte Mais informação - Encaixa:
- YAMAHA MT-09 Bar Handle Type
- その他 Universal
- YAMAHA FZ1N Bar Handle Type
- YAMAHA MT-07 Bar Handle Type
- YAMAHA FZ-8 Bar Handle Type
- ...e mais.
I decided to add a Helmet holder to the Axel Holder because it became difficult to use the standard Helmet holder after adding the Side bag support to the SEROW.I was thinking about KIJIMA's product, ...consulte Mais informação - Encaixa:
- HONDA PCX150 KF30
- HONDA PCX125 JF81/JF84
Are you an OEM Product OEM? It was Exactly without missing a beat.Durability is an unknown quantity as I just replaced it, but it makes me feel fine.I replaced it at about 10,000 km away, but I don't ...consulte Mais informação - Encaixa:
- HONDA PCX125 JF28
I purchased this product after checking the product information many times and it is defective. I'm not sure if I can get the belt to hit the case or not. I would like to return it or replace it with ...consulte Mais informação - Encaixa:
- HONDA PCX125 10-11
- HONDA gyro canopy (TA03)
- HONDA gyro canopy (4ST)
- HONDA Dio 110. JF31
- HONDA
- ...e mais.
It's not very high performance, but I don't think it's a problem to put on a motorcycle for commuting.I don't have any problems with braking performance, so it's a good one to replace anyway.It doesn'...consulte Mais informação - Encaixa:
- YAMAHA MT-09 Bar Handle Type
- その他 Universal
- YAMAHA FZ1N Bar Handle Type
- YAMAHA MT-07 Bar Handle Type
- YAMAHA FZ-8 Bar Handle Type
- ...e mais.
I put it on my daughter's Grom I want a Holder too! I kept saying that I needed it! I bought it because the price was reasonable I had it installed at the storeIt made it easier for me to take it with...consulte Mais informação
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING