Encaixa:- HONDA MONKEY125
Top bridge kit is of high quality but you need a thicker steering stem washer as steering stem nut bottoms out when tightened, the Over Racing top bridge in thinner than std bridge, Over Racing needs ...consulte Mais informação
Encaixa:- HONDA MONKEY125 (JB02-1000001-)
I installed this exhaust system on my girlfriend's MONKEY125. I chose this Exhaust System because she is the same as me and does not want to destroy the normal style. The installation can be done by a...consulte Mais informação
Normal suspension is fluffy and the sinkage is Large threshold MONKEY125, my weight is heavy. (85kg) It is one of the causes, but even if it is not, it is still soft, front and rear suspension. In add...consulte Mais informação
Encaixa:- SUZUKI AVENIS150 00
- SUZUKI AVENIS150 01
- SUZUKI AVENIS150 98
- KAWASAKI EPSILON150 02
- HONDA APE 100 08
- ...e mais.
I use it with the front tire of MONKEY125. Of course, both front and rear are equipped with this K180. It is a "Dirt trackTire", so you can run and turn more safely than High grip tire or Block patter...consulte Mais informação
Encaixa:- HONDA MONKEY125 18
- HONDA MONKEY125 19
- HONDA MONKEY125 20
- SUZUKI AVENIS125 00
- SUZUKI AVENIS125 98
- ...e mais.
The tire size of the MONKEY125 is a little bit special and there are not many choices. The tire size of the MONKEY125 seems to be a little special and there are not many choices. If the purpose is to ...consulte Mais informação
Encaixa:- HONDA MONKEY125
I have used about 4 GCraft products because of their good performance, and this Fender Eliminator is no problem. The "Normal rear fender eliminator" is a task that should be done by everyone with an e...consulte Mais informação
Exhaust system replacement is one of the most popular custom modification. There are several Up type mufflers available from famous manufacturers and custom builders, but the OUTEX muffler is the best...consulte Mais informação
Encaixa:- HONDA MONKEY 125
In all, good quality and no problems with fitting and chrome.
Welding somewhat coarse, maybe Tig instead of chosen method.consulte Mais informação
Encaixa:- HONDA MONKEY125 Thai model (MLHJB02)
- HONDA MONKEY125 (JB02-1000001-)
It was done at the same time as the Exhaust System replacement. Because the installation work is only exchanged with the Normal air cleaner, it is pontoon without processing! 。 As for the effect, I do...consulte Mais informação
Encaixa:- HONDA GROM (JC61-1300001-) 2016 MODEL MSX125SF 2016 MODEL
- HONDA MONKEY125 (JB02-1000001-)
To install, remove the Handlebar→loosen the Fork bolt→loosen the Top bolt→remove the Top bolt from the ROD"replace this Top bolt"with→install→temporarily tighten the Top bolt→ Install Handlebar→Top bo...consulte Mais informação
Installation is easy, just replace the Nut with the Rear Suspension Nut, so anyone can do it. 。 Not only will it look better, but it will also make it easier to use the maintenance stand and improve t...consulte Mais informação
Encaixa:- HONDA MONKEY125 MLHJB002
- HONDA MONKEY125 JB02-1000001-
Installed on MONKEY125I didn't like the squishy feel of NORMAL, so I installed this product.Pushing feeling has been changed and the direct feeling of Shift has been improved.However, please note that...consulte Mais informação
Encaixa:- HONDA MONKEY125 2BJ-JB02
Purchased for a break from the last OEMAir cleaner box with a resin feel.It's just as I thought it would be, and it goes well with the Exhaust System's PlatingHeat Guard!It is this product, but it mak...consulte Mais informação
It's been three years since I took delivery of my GROM. Recently, the engine has not been starting well and sometimes I have to use Jump Starter to get the engine to start.... I always carry a Jump St...consulte Mais informação
The battery of OEM had gone out of battery several times, and JumpStarted every time, but the battery died because of repeated battery rise.When I looked for the same battery on amazon, it was a littl...consulte Mais informação
Encaixa:- HONDA Grom HRC race based car
- HONDA MONKEY125 All models of JB 02
- HONDA Grom FNO.JC61-1000001-1299999
- HONDA Grom FNO.JC61-1300001-
- HONDA Grom All models of JC75
I weigh 85kg and am a heavyweight. At this weight, according to Kitako data, the springs are 6N or more, even the springs in the Orleans cartridge kit " 6.0N" specified for weight 80kg and above. I pu...consulte Mais informação
I weigh 85kg and am a heavyweight. With this weight, according to KITACO's Data, the Spring of 6N or more, according to KITACO's Data, and even the Spring of OHLINS CartridgeKit " 6.0N" designation fo...consulte Mais informação
The black and gold color of the D.I. DChain, which is safe and reliable, looks parenthesis well and has less rust and degradation than other manufacturers' products that I used before.I recommend it f...consulte Mais informação
We choose SUNSTAR because of Parts' accuracy and absolute reliability.I use it for the Large type SS that we use at Circuit, and I think it's safe to use.This time, I converted from NORMAL15T to 14T o...consulte Mais informação
Encaixa:- HONDA MONKEY125 JB02 All models
- HONDA Grom JC 61/75 All models
This is the second time to write a comment on Shift link made by KITACO.Impressions of the former and the latter, I also read the impressions of M company G company, but this price is made by FOR JAPA...consulte Mais informação



















?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING