Encaixa:- HONDA TLM50
- HONDA NSR80
- HONDA RTL50S
- HONDA NSR50
- HONDA NS50R
- ...e mais.
The OEM one was deteriorating, so I bought it and replaced it.The Throttle response did not improve to the extent that I could feel it, but it was good because I could use it normally.consulte Mais informação
Encaixa:- Vespa PX150FL2 02- (02.7-) Number of required parts:1
- YAMAHA YZ80 74-82 (74-82.9) Number of required parts:1
- KAWASAKI Z200 77- (77.7-) KZ200A Necessity:1 pc.
- KAWASAKI KL250 78-82 (78-82.10) KL250A Necessary quantity:1 pc
- YAMAHA RZ250 80-83 (80.8-83.1) Required number of pins:2
- ...e mais.
First of all, I feel that the Idling sound became thicker from the moment I applied the Engine.When you start driving, you will feel the Torque feeling has been increased.It wasn't a drastic change, b...consulte Mais informação
Encaixa:- KAWASAKI KDX125/SR 1999 Front
- KAWASAKI KDX125/SR 1997 Front
- KAWASAKI KDX125/SR 1996 Front
- KAWASAKI KDX125/SR 1993 Front
- KAWASAKI KDX125/SR 1991 Front
- ...e mais.
This purchase is a spare.It's a tube tire, so I carry it with me when I go out, just in case I have a puncture or the motorcycle shop doesn't have the tube in stock.Also, if you puncture in the middle...consulte Mais informação
Encaixa:- Vespa PX150FL2 02- (02.7-) Number of required parts:1
- YAMAHA YZ80 74-82 (74-82.9) Number of required parts:1
- KAWASAKI Z200 77- (77.7-) KZ200A Necessity:1 pc.
- KAWASAKI KL250 78-82 (78-82.10) KL250A Necessary quantity:1 pc
- YAMAHA RZ250 80-83 (80.8-83.1) Required number of pins:2
- ...e mais.
It arrived in a very messed up outer box.I don't mind a little bit, but I was worried because it was a Spark plug, which is a broken product. The content was Large sturdy? It was.consulte Mais informação
Encaixa:- Vespa PX150FL2 02- (02.7-) Number of required parts:1
- YAMAHA YZ80 74-82 (74-82.9) Number of required parts:1
- KAWASAKI Z200 77- (77.7-) KZ200A Necessity:1 pc.
- KAWASAKI KL250 78-82 (78-82.10) KL250A Necessary quantity:1 pc
- YAMAHA RZ250 80-83 (80.8-83.1) Required number of pins:2
- ...e mais.
Because MotoDXPlug is not set up, I used it, and because I exchanged it immediately after delivery, I do not know the difference, but I heard that it lasts a long time, so it is good!consulte Mais informação
Encaixa:- Vespa PX150FL2 02- (02.7-) Number of required parts:1
- YAMAHA YZ80 74-82 (74-82.9) Number of required parts:1
- KAWASAKI Z200 77- (77.7-) KZ200A Necessity:1 pc.
- KAWASAKI KL250 78-82 (78-82.10) KL250A Necessary quantity:1 pc
- YAMAHA RZ250 80-83 (80.8-83.1) Required number of pins:2
- ...e mais.
How was your experience with it?I swapped out the standard Plug for this one.If you are a regular rider, you will feel the effect.The grain of the vibration is crisp, and the pull-pull feeling is incr...consulte Mais informação
I was worried about Seal chain, but this sizeChain's Seal is too small for some things.and Friction loss is Large threshold.It's a non-seal chain, but it seems to be the Enhanced Version.I've got it t...consulte Mais informação
Encaixa:- SUZUKI RH250 1984 Front
- SUZUKI DR-Z250 2016 Front
- SUZUKI DR250S 1982 Front
- KAWASAKI KMX200 1987 Front
- KAWASAKI KLX250SR 1997 Front
- ...e mais.
It is probably the cheapest product in the same size. However, I don't feel that the quality is inferior to the so called MAJORManufacturer products. I think it can be used enough. It is good that the...consulte Mais informação
The quality is solid and even a beginner could easily cut and join the Chain.consulte Mais informação
[How is it used?feel wellWas the one you received as per Image?ImageWas the installation difficult?it's simpleHow was your experience with it?Good[Included Parts:were they on?None[Was there anythi...consulte Mais informação
Encaixa:- HONDA NS50F 87-90 Rear Capacity:1 caliper
- HONDA MTX80S 80-82 HD06 Front Quantity:1 caliper
- SUZUKI TL125S Ihatovo 81 X Front Carrying capacity:1 caliper
- SUZUKI TL125S Ihatovo 81 X Rear Capacity:1 caliper
- HONDA MTX80RF 87 Rear:1 caliper (HD09/E516/0)
- ...e mais.
Not 1 star for quality.When I bought it, I checked it many times in the fitment table (TLR200), and when I received it and tried to install it 3 months after purchase, the Size was completely differen...consulte Mais informação
Encaixa:- MOTOGUZZI 1100California -95 Required number of units:2
- MOTOGUZZI 1000S Required number of units:2
- Others Universal
- YAMAHA XS1100 78- The number of pieces needed:4
- YAMAHA XJ900 84- Required number of pieces:4
- ...e mais.
Last time, in order for the phenomenon which fires off in the low rotation range to occur, I was able to write the impression that it did not seem to be suitable for my Engine Spec. but when I changed...consulte Mais informação
Encaixa:- MOTOGUZZI 1100California -95 Required number of units:2
- MOTOGUZZI 1000S Required number of units:2
- Others Universal
- YAMAHA XS1100 78- The number of pieces needed:4
- YAMAHA XJ900 84- Required number of pieces:4
- ...e mais.
This is a tuning engine with high compression piston. The ignition is a full course of MSA with Vup16 and Votani SP2.The carburetor setting is quite thick to prevent knocking.It seems to have been inc...consulte Mais informação
Encaixa:- MOTOGUZZI 1100California -95 Required number of units:2
- MOTOGUZZI 1000S Required number of units:2
- Others Universal
- YAMAHA XS1100 78- The number of pieces needed:4
- YAMAHA XJ900 84- Required number of pieces:4
- ...e mais.
The quality and texture is good, but I don't think I could get that Performance with my SR.Wiseco's High-Compression Piston and High Camshaft may not be compatible with the tuning engine.The ignition ...consulte Mais informação- I used it on my mini bike racer.There is no problem at all in normal use, but the durability felt low.consulte Mais informação
- The black and gold color of the D.I. DChain, which is safe and reliable, looks parenthesis well and has less rust and degradation than other manufacturers' products that I used before.I recommend it f...consulte Mais informação
- Safe JapanIf you know the number of links, the exchange is easy.It has little stretch, and as long as you maintain it tightly, it will last a long time.consulte Mais informação
- XLR250R (MD16) I bought it for.There are cheaper ones, but we went with the reliable YUASA product.It is an OEM designation, so I was able to install it with no problems.consulte Mais informação
- Encaixa:
- KTM 65 SX 08-20 [Number of genuine links]112
- APRILIA TUONO50 03-04 [Number of genuine links]120
- APRILIA RX6V 99-04 [Number of genuine links]126
- APRILIA MX 04 [Number of genuine links]126
- APRILIA 50RS 99-00 [Number of genuine links]120
- ...e mais.
I was torn between seal chain and non-seal chain. I chose the Non-seal Chain because I don't have that much trouble with ChainMaintenance because I heard that theComfortable to use, but with the Reinf...consulte Mais informação - You can change it by yourself.It's a trustworthy brand, so you can rest assured. It was so Yasu.consulte Mais informação














?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING